Organic Chemistry
Polymers
Giant molecules from small ones: classification, addition and condensation polymerisation, polythene, Teflon, nylons, terylene, bakelite, rubber and vulcanisation, Buna S and Buna N, biodegradable polymers and molecular mass averages
NEET style
Polymers were dropped from the rationalised NCERT book and from the NEET UG syllabus (NMC, 2024 onwards), so expect few or no questions; older papers asked monomers, addition versus condensation, thermoplastic versus thermosetting, Ziegler Natta catalysis and biodegradable polymers
JEE style
Dropped from JEE Main from 2024; where the unit is still examined, expect monomer and polymer matching and number average and weight average molecular mass calculations
Classification
| Basis | Types | Examples |
|---|---|---|
| Source | Natural / semisynthetic / synthetic | Proteins, rubber / cellulose acetate (rayon) / nylon, PVC |
| Structure | Linear / branched / cross linked (network) | HDPE, PVC / LDPE / bakelite, melamine |
| Mode of polymerisation | Addition (chain growth) / condensation (step growth) | Polythene / nylon 6,6 |
| Monomers | Homopolymer / copolymer | Polythene / Buna S |
| Molecular forces | Property | Examples |
|---|---|---|
| Weakest (elastomers) | Stretch and recover; a few cross links pull chains back | Vulcanised rubber, Buna S, Buna N, neoprene |
| Strongest: hydrogen bonds or strong dipoles (fibres) | High tensile strength, crystalline | Nylon 6,6, terylene |
| Intermediate (thermoplastics) | Soften on heating, can be remoulded | Polythene, polystyrene, PVC |
| Cross linked network (thermosets) | Set permanently on heating; cannot be reused | Bakelite, urea formaldehyde resin |
Addition polymers
- 1Initiation: a free radical initiator (benzoyl peroxide) decomposes; the radical adds to the monomer’s C=C.
- 2Propagation: the new radical adds to more monomers, growing the chain rapidly.
- 3Termination: two radicals combine (or disproportionate).
| Polymer | Monomer | Conditions / use |
|---|---|---|
| LDPE | Ethene | 1000 to 2000 atm, 350 to 570 K, traces of or peroxide; branched, used for squeeze bottles and film |
| HDPE | Ethene | Ziegler Natta catalyst ( + ), 6 to 7 atm, 333 to 343 K; linear, used for buckets and pipes |
| Teflon (PTFE) | Free radical or persulfate catalyst, high pressure; nonstick, chemically inert | |
| Polyacrylonitrile (orlon, acrilan) | Peroxide; wool substitute | |
| PVC | Pipes, raincoats | |
| Polystyrene | Insulation, packaging | |
| Neoprene | Chloroprene | Conveyor belts, gaskets, hoses |
Condensation polymers
| Polymer | Monomers | Notes |
|---|---|---|
| Nylon 6,6 | Hexamethylenediamine + adipic acid | High pressure and temperature (about 553 K); polyamide; sheets, bristles, textiles |
| Nylon 6 | Caprolactam | Heated with water at high temperature (about 533 to 543 K); tyre cords, fabrics, ropes |
| Terylene (Dacron) | Ethylene glycol + terephthalic acid | Zinc acetate and catalyst, 420 to 460 K; crease resistant polyester fabric |
| Glyptal | Ethylene glycol + phthalic acid | Paints, lacquers |
| Bakelite | Phenol + formaldehyde | Novolac (linear, used in paints) → cross linked with more HCHO; combs, switches, handles |
| Melamine formaldehyde | Melamine + formaldehyde | Unbreakable crockery |
Rubber and copolymers
Natural rubber is cis-1,4-polyisoprene (from latex); its coiled chains are held only by weak van der Waals forces. It becomes soft and sticky when warm (above about 335 K) and brittle when cold (below about 283 K). Vulcanisation, heating with sulfur and an additive at 373 to 415 K, forms sulfur bridges (cross links) at the reactive sites next to the double bonds, making the rubber stiffer and tougher. Tyre rubber contains about 5% sulfur.
| Copolymer | Monomers | Property |
|---|---|---|
| Buna S (SBR) | 1,3-Butadiene + styrene | Tough; tyres, footwear, cable insulation |
| Buna N | 1,3-Butadiene + acrylonitrile | Oil resistant; oil seals, tank linings |
Biodegradable polymers: PHBV (3-hydroxybutanoic acid + 3-hydroxypentanoic acid; used in packaging, orthopaedic devices and controlled drug release) and nylon 2 nylon 6 (an alternating copolymer of glycine and aminocaproic acid).
Molecular mass of polymers
Natural polymers are usually monodisperse (PDI = 1), while synthetic polymers have PDI > 1
If masses rather than numbers of molecules are given, use : then and .
Formula bank
Polythene
Nylon 6,6
Terylene
Number average
Weight average
Polydispersity
Tricks & mnemonics
Addition means no byproduct
Buna decoded
LDPE vs HDPE
Thermosets don’t melt
Biodegradable pair
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
- High density polythene is obtained by polymerising ethene in a hydrocarbon solvent with a Ziegler Natta catalyst (triethylaluminium + titanium tetrachloride) at 333 to 343 K and 6 to 7 atm.Class 12 · Polymers (earlier edition)
- Vulcanisation of rubber with sulfur forms cross links at the reactive sites near the double bonds, stiffening the rubber.Class 12 · Polymers (earlier edition)
- Buna N, a copolymer of 1,3-butadiene and acrylonitrile, is resistant to petrol, lubricating oil and organic solvents.Class 12 · Polymers (earlier edition)
- PHBV is a biodegradable copolymer of 3-hydroxybutanoic acid and 3-hydroxypentanoic acid used in packaging, orthopaedic devices and controlled drug release.Class 12 · Polymers (earlier edition)
Solved problems
- ACaprolactam; addition
- BHexamethylenediamine + adipic acid; condensation
- CEthylene glycol + terephthalic acid; condensation
- DChloroprene; addition
Practice
Column I: (P) neoprene (Q) PVC (R) orlon (S) glyptal
Column II: (1) acrylonitrile (2) chloroprene (3) ethylene glycol + phthalic acid (4) vinyl chloride
Column I: (P) Buna S (Q) Buna N (R) neoprene (S) natural rubber
Column II: (1) chloroprene (2) isoprene (3) 1,3-butadiene + acrylonitrile (4) 1,3-butadiene + styrene
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics