Organic Chemistry

Alkanes & Cycloalkanes

The saturated hydrocarbons: preparation by hydrogenation, Wurtz, decarboxylation and Kolbe electrolysis, physical property trends, free radical halogenation and its selectivity, combustion, oxidation, aromatisation and cracking, and ring strain in cycloalkanes

NEET style

Wurtz and decarboxylation products, free radical halogenation mechanism steps and boiling point trends with branching

JEE style

Counting monochlorination products (with and without stereoisomers), product ratios from relative reactivities (3° : 2° : 1°), Kolbe electrolysis, mixed Wurtz products and eudiometry

Preparation of alkanes

CHX2=CHX2+HX2→Ni/Pt/PdCHX3−CHX3\ce{CH2=CH2 + H2 ->[Ni/Pt/Pd] CH3-CH3}

Catalytic hydrogenation (Pt or Pd work at room temperature; Ni needs higher temperature and pressure, about 523 to 573 K in the Sabatier and Senderens method)

2 CHX3CHX2Br+2 Na→dry etherCHX3CHX2CHX2CHX3+2 NaBr\ce{2CH3CH2Br + 2Na ->[dry ether] CH3CH2CH2CH3 + 2NaBr}

Wurtz reaction: gives symmetrical alkanes with double the carbons; methane cannot be made this way

CHX3CHX2COONa+NaOH→ΔCaOCHX3CHX3+NaX2COX3\ce{CH3CH2COONa + NaOH ->[CaO][\Delta] CH3CH3 + Na2CO3}

Decarboxylation with soda lime: one carbon fewer than the salt

2 CHX3COONa+2 HX2O→electrolysisCHX3−CHX3+2 COX2+HX2+2 NaOH\ce{2CH3COONa + 2H2O ->[electrolysis] CH3-CH3 + 2CO2 + H2 + 2NaOH}

Kolbe electrolysis: ethane and COX2\ce{CO2} at the anode, HX2\ce{H2} at the cathode

CHX3CHX2Cl+HX2→Zn/HX+CHX3CHX3+HCl\ce{CH3CH2Cl + H2 ->[Zn/H+] CH3CH3 + HCl}

Reduction of alkyl halides with zinc and dilute HCl

Physical properties

  • Nonpolar; insoluble in water, soluble in nonpolar solvents. At 298 K, C1 to C4 are gases, C5 to C17 liquids and C18 onwards waxy solids.
  • Boiling point rises with molar mass (stronger dispersion forces).
  • Branching lowers the boiling point (less surface contact): n-pentane 309 K > isopentane 301 K > neopentane 282.5 K.
  • Melting points of n-alkanes alternate between even and odd members (even members pack better); highly symmetrical neopentane melts unusually high because it packs well.

Free radical halogenation

CHX4+ClX2→hνCHX3Cl+HCl\ce{CH4 + Cl2 ->[h\nu] CH3Cl + HCl} proceeds by a free radical chain mechanism:

  1. 1
    Initiation: ClX2→hν2 Cl ⋅ \ce{Cl2 ->[h\nu] 2Cl.}
  2. 2
    Propagation: Cl ⋅ +CHX4→ ⋅ CHX3+HCl\ce{Cl. + CH4 -> .CH3 + HCl};  ⋅ CHX3+ClX2→CHX3Cl+Cl ⋅ \ce{.CH3 + Cl2 -> CH3Cl + Cl.}
  3. 3
    Termination: Cl ⋅ +Cl ⋅ →ClX2\ce{Cl. + Cl. -> Cl2};  ⋅ CHX3+ ⋅ CHX3→CX2HX6\ce{.CH3 + .CH3 -> C2H6};  ⋅ CHX3+Cl ⋅ →CHX3Cl\ce{.CH3 + Cl. -> CH3Cl}

Reactivity of halogens: FX2>ClX2>BrX2>IX2\ce{F2} > \ce{Cl2} > \ce{Br2} > \ce{I2}. Iodination is reversible and needs an oxidant (HIOX3\ce{HIO3} or HNOX3\ce{HNO3}) to remove HI. Excess halogen gives polyhalogenated products (CHX2ClX2\ce{CH2Cl2}, CHClX3\ce{CHCl3}, CClX4\ce{CCl4}).

Product distribution (per H relative reactivity)
% product∝(number of equivalent H)×(relative reactivity)\%\,\text{product} \propto (\text{number of equivalent H})\times(\text{relative reactivity})

For chlorination at room temperature, 3° : 2° : 1° ≈ 5.0 : 3.8 : 1, while bromination is far more selective (≈ 1600 : 82 : 1)

Combustion, oxidation, isomerisation and cracking

CXnHX2n+2+3 nX1+2OX2→n COX2+(nX1+)HX2O\ce{C_nH_{2n+2} + \frac{3n+1}{2}O2 -> nCO2 + (n+1)H2O}
ReactionConditionsProduct
Controlled oxidation of methaneCu, 523 K, 100 atmMethanol
Controlled oxidation of methaneMoX2OX3\ce{Mo2O3}Methanal
Oxidation of 3° alkaneKMnOX4\ce{KMnO4}3° alcohol (for example 2-methylpropan-2-ol)
IsomerisationAnhydrous AlClX3\ce{AlCl3}/HClBranched alkanes
AromatisationCrX2OX3\ce{Cr2O3}/VX2OX5\ce{V2O5}/MoX2OX3\ce{Mo2O3} on alumina, 773 K, 10 to 20 atmn-Hexane → benzene; n-heptane → toluene
Steam reformingNi, 1273 KCHX4+HX2O→CO+3 HX2\ce{CH4 + H2O -> CO + 3H2}
Pyrolysis (cracking)Heat, catalystSmaller alkanes + alkenes

Cycloalkanes: cyclopropane (ring angle 60°) and cyclobutane (about 90°) have large angle strain. Cyclopropane behaves partly like an alkene: its ring opens with HX2\ce{H2}/Ni, BrX2\ce{Br2} or HBr (giving, for example, 1,3-dibromopropane), yet it does not decolourise cold alkaline KMnOX4\ce{KMnO4}. Cyclobutane opens only on hydrogenation at a higher temperature. Cyclohexane adopts a strain free chair.

Formula bank

General formula

CXnHX2n+2\ce{C_nH_{2n+2}}

Wurtz reaction

2 RX+2 Na→R−R+2 NaX\ce{2RX + 2Na -> R-R + 2NaX}

Decarboxylation

RCOONa+NaOH→CaORH+NaX2COX3\ce{RCOONa + NaOH ->[CaO] RH + Na2CO3}

Kolbe electrolysis

2 RCOOX−→R−R+2 COX2+2 eX−\ce{2RCOO- -> R-R + 2CO2 + 2e-}

Combustion

CXnHX2n+2+3 nX1+2OX2→n COX2+(nX1+)HX2O\ce{C_nH_{2n+2} + \frac{3n+1}{2}O2 -> nCO2 + (n+1)H2O}

Chlorination selectivity

3∘:2∘:1∘≈5:3.8:13^\circ : 2^\circ : 1^\circ \approx 5 : 3.8 : 1

Aromatisation

CX6HX14→773 KCrX2OX3CX6HX6+4 HX2\ce{C6H14 ->[Cr2O3][773 K] C6H6 + 4H2}

Tricks & mnemonics

Carbon bookkeeping

Wurtz: carbons double. Decarboxylation: one carbon lost. Kolbe: two R groups join (2 × carbons of salt − 2).

Branching and boiling point

Branched isomers boil lower (less contact) but compact symmetrical ones melt higher (better packing).

Count monochloro products by equivalent H

Number of monochlorinated structural isomers = number of distinct H environments. 2-Methylbutane has 4; counting enantiomers it gives 6.

Bromine is picky

Chlorine is fast and unselective; bromine is slow and highly selective for 3° H, because its hydrogen abstraction step is endothermic and has a late transition state that resembles the alkyl radical.

Mixed Wurtz = 3 products

RX + R′X + Na always gives three alkanes.

NCERT high yield lines

Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.

  • Wurtz reaction is used to prepare higher alkanes containing an even number of carbon atoms; methane cannot be prepared by this method.Class 11 · Unit 9
  • Sodium salts of carboxylic acids on heating with soda lime give alkanes containing one carbon atom less than the carboxylic acid (decarboxylation).Class 11 · Unit 9
  • Halogenation of alkanes takes place by a free radical chain mechanism involving initiation, propagation and termination.Class 11 · Unit 9
  • Among isomeric alkanes, the boiling point decreases with increase in branching because of decreased surface area and weaker van der Waals forces.Class 11 · Unit 9

Solved problems

Example 1
NEETFoundation
A mixture of bromomethane and bromoethane is treated with sodium in dry ether. How many alkanes form?
  1. A1
  2. B2
  3. C3
  4. D4
Example 2
NEETJEE MainFoundation
What is obtained by (a) heating sodium propanoate with soda lime, (b) Kolbe electrolysis of sodium propanoate?
Example 3
JEE MainExam level
How many structurally different monochlorination products does 2-methylbutane give (ignore stereoisomers)?
Example 4
JEE MainJEE AdvancedAdvanced
Using relative reactivities 2° : 1° = 3.8 : 1 for chlorination, estimate the percentage of 2-chloropropane formed from propane.

Practice

Q1
Single correct
NEETFoundation
Important
Methane cannot be prepared by:
Q2
Single correct
NEETFoundation
Important
Which isomer of CX5HX12\ce{C5H12} has the lowest boiling point?
Q3
Numerical
JEE MainExam level
Important
How many distinct monochlorination products (structural) does 2-methylbutane give?
Q4
Numerical
JEE AdvancedAdvanced
Important
Using 2° : 1° = 3.8 : 1, what percentage (nearest integer) of monochlorinated propane is 2-chloropropane?
Q5
Matrix match
NEETJEE AdvancedFoundation
Important
Match the reaction with its product.
Column I: (P) CX2HX5Br\ce{C2H5Br} + Na/ether (Q) CHX3COONa\ce{CH3COONa} + soda lime (R) CHX3COONa\ce{CH3COONa}, Kolbe electrolysis (S) n-hexane, CrX2OX3\ce{Cr2O3}/773 K
Column II: (1) methane (2) butane (3) benzene (4) ethane
Q6
Single correct
NEETFoundation
Kolbe electrolysis of sodium ethanoate gives at the anode:
Q7
Single correct
NEETFoundation
The termination step in methane chlorination is:
Q8
Single correct
NEETFoundation
n-Hexane heated with CrX2OX3\ce{Cr2O3} at 773 K and 10 to 20 atm gives:
Q9
One or more correct
NEETJEE MainFoundation
Which reactions increase the number of carbon atoms?
Q10
Single correct
JEE MainExam level
Which halogen reacts most selectively with tertiary C–H bonds?
Q11
Numerical
NEETFoundation
How many moles of OX2\ce{O2} are needed for complete combustion of 1 mol of propane?
Q12
Numerical
JEE MainJEE AdvancedAdvanced
2-Methylbutane is monochlorinated in light at room temperature. Taking the relative reactivity per hydrogen as 3° : 2° : 1° = 5 : 3.8 : 1, what percentage (nearest integer) of the monochloro product is 2-chloro-2-methylbutane?
Q13
Numerical
NEETJEE MainExam level
2-Methylpropane is monochlorinated at room temperature, with relative reactivity per hydrogen 3° : 1° = 5 : 1. What is the ratio of 1-chloro-2-methylpropane to 2-chloro-2-methylpropane in the product (one decimal place)?
Q14
Numerical
JEE MainJEE AdvancedAdvanced
Counting stereoisomers separately, how many monochloro products can 2-methylbutane give on free radical chlorination?
Q15
One or more correct
NEETJEE MainExam level
An aqueous solution containing both sodium ethanoate and sodium propanoate is electrolysed (Kolbe). Which alkanes are formed at the anode?
Q16
Single correct
NEETJEE MainExam level
Which alkyl chloride, treated with sodium in dry ether, gives 2,3-dimethylbutane as the only alkane?
Q17
One or more correct
NEETJEE MainExam level
Which alkanes can be obtained as the only coupling product of a Wurtz reaction using a single alkyl halide?
Q18
Single correct
JEE MainJEE AdvancedAdvanced
A sodium carboxylate X gives 2-methylpropane when heated with soda lime, and 2,2,3,3-tetramethylbutane on Kolbe electrolysis. X is:
Q19
Single correct
JEE AdvancedAdvanced
Bromination of propane gives about 97% 2-bromopropane, whereas chlorination gives only about 56% 2-chloropropane. The best explanation is:
Q20
Numerical
JEE MainJEE AdvancedAdvanced
20 mL of a gaseous alkane was exploded with 150 mL of oxygen. After cooling to room temperature, the residual gas measured 100 mL, and it fell to 20 mL on shaking with aqueous KOH. How many carbon atoms are present in one molecule of the alkane?
Q21
Single correct
NEETJEE MainExam level
Which reaction is given readily by cyclopropane but not by cyclohexane under mild conditions?
Q22
Matrix match
NEETJEE MainExam level
Match each alkane with the number of structurally different monochlorination products.
Column I: (P) n-pentane (Q) 2-methylbutane (R) 2,2-dimethylpropane (S) 2,3-dimethylbutane
Column II: (1) one (2) two (3) three (4) four

Ready for the real thing?

Take a timed, NTA style test on this chapter with instant analytics