Name any organic molecule systematically: word roots, functional group priority, the lowest locant and alphabetical rules, polyfunctional, cyclic and aromatic compounds, and the degree of unsaturation
NEET · HighJEE Main · HighJEE Advanced · Medium
NEET style
One question naming a branched or bifunctional compound, or spotting the correct or incorrect IUPAC name, set purely on NCERT rules
JEE style
Polyfunctional and unsaturated compounds (enynes, keto acids, cyano substituted acids), bicyclic and substituted aromatic names, and degree of unsaturation counting
When several functional groups are present, only the highest priority one is the suffix; all others become prefixes. The order below is the one NCERT gives.
Beyond NCERT: IUPAC also ranks acid anhydrides (suffix “oic anhydride”) between sulfonic acids and esters; NCERT’s list leaves them out
Priority
Group
Suffix
Prefix
1
Carboxylic acid, −COOH
-oic acid
carboxy
2
Sulfonic acid, −SOX3H
-sulfonic acid
sulfo
3
Ester, −COOR
alkyl -oate
alkoxycarbonyl
4
Acid halide, −COX
-oyl halide
halocarbonyl
5
Amide, −CONHX2
-amide
carbamoyl
6
Nitrile, −CN
-nitrile
cyano
7
Aldehyde, −CHO
-al
formyl or oxo
8
Ketone, >C=O
-one
oxo
9
Alcohol, −OH
-ol
hydroxy
10
Amine, −NHX2
-amine
amino
11
Alkene, >C=C<
-ene
alkenyl (side chain)
12
Alkyne, −C≡C−
-yne
alkynyl (side chain)
Always prefixes
−R, CX6HX5X−, −X, −NOX2, −OR
never a suffix
alkyl, phenyl, halo, nitro, alkoxy
Rules for numbering and naming
1
Choose the parent chain: it must contain the principal functional group and the maximum number of multiple bonds; then the longest chain. If two chains are equally long, take the one with more side chains.
2
Number to give the lowest locant to the principal functional group, then to multiple bonds, then to substituents (first point of difference).
3
If a double and triple bond tie, the double bond gets the lower number. Write “ene” before “yne” (but-1-en-3-yne).
4
List prefixes in alphabetical order, ignoring multiplying prefixes (di, tri) and sec-/tert-, but counting iso, neo and cyclo. If substituents still tie for position, the one cited first alphabetically gets the lower number: 3-ethyl-6-methyloctane, not 6-ethyl-3-methyloctane.
5
A branched substituent is numbered from the carbon attached to the parent chain (its C1) and its name goes in brackets: 5-(2,2-dimethylpropyl)nonane.
6
Separate numbers by commas and numbers from words by hyphens: 2,2-dimethylbutane.
CHX3−CH(CHX3)−CHX2−CHX3
2-Methylbutane, not 3-methylbutane, because the branch must get the lowest locant
CHX2=CH−C≡CH
But-1-en-3-yne: numbering gives (1,3) from both ends, so the double bond gets the lower number
CHX3−CO−CHX2−CHX2−OH
4-Hydroxybutan-2-one: ketone outranks alcohol, so it is the suffix
Cyclic and aromatic compounds
Rings take the prefix cyclo-. When a ring and a chain are both present, the part carrying the principal functional group is the parent: CX6HX11CHX2CHX2OH is 2-cyclohexylethan-1-ol. Without a functional group, a ring with a small alkyl group is named as the ring: methylcyclohexane. Ring substituents get the lowest locant set: 3-ethyl-1,1-dimethylcyclohexane, not 1-ethyl-3,3-dimethylcyclohexane.
When a CHO, COOH or CN group is attached to a ring, its carbon cannot be numbered as part of the ring, so the suffix includes that carbon: cyclohexanecarbaldehyde, cyclohexanecarboxylic acid, benzenecarbonitrile. The ring carbon carrying it is C1, and a ring C=O elsewhere is cited as oxo (4-oxocyclohexane-1-carbaldehyde).
Beyond NCERT (JEE Advanced): bicyclic alkanes are named bicyclo[x.y.z]alkane. The numbers x, y and z count the carbons in the three bridges joining the two bridgehead carbons, written in decreasing order, and the alkane name counts every ring carbon: norbornane is bicyclo[2.2.1]heptane and decalin is bicyclo[4.4.0]decane.
Common name
Structure
IUPAC name
Toluene
CX6HX5CHX3
Methylbenzene
Phenol
CX6HX5OH
Phenol (also its IUPAC name)
Aniline
CX6HX5NHX2
Aminobenzene in Class 11 NCERT; aniline or benzenamine in Class 12
Anisole
CX6HX5OCHX3
Methoxybenzene
Benzaldehyde
CX6HX5CHO
Benzenecarbaldehyde (benzaldehyde is also accepted)
Acetophenone
CX6HX5COCHX3
1-Phenylethan-1-one
Benzoic acid
CX6HX5COOH
Benzenecarboxylic acid
Disubstituted benzenes are numbered to give the lowest locants, written 1,2- (ortho, o-), 1,3- (meta, m-) and 1,4- (para, p-): 1,3-dibromobenzene, not 1,5-dibromobenzene. With three or more groups the o, m and p prefixes cannot be used; number for the lowest locants and cite the groups alphabetically: 1-chloro-2,4-dinitrobenzene.
When a parent with a common name (phenol, aniline, anisole, benzoic acid) is used, its own group takes position 1: 4-nitrophenol, 2-chlorobenzoic acid, 2-chloro-4-methylanisole, 4-ethyl-2-methylaniline, 3,4-dimethylphenol. A benzene ring attached to a chain that carries the functional group is named as the substituent phenyl (CX6HX5X−, Ph).
Degree of unsaturation
Degree of unsaturation (double bond equivalent)
DU=C+1+2N−H−X
O and S are ignored and halogens count like H; DU = number of rings + number of π bonds
Benzene CX6HX6: DU = 6 + 1 − 3 = 4 (one ring + three π bonds). Nitrobenzene CX6HX5NOX2: DU = 6 + 1 + (1 − 5)/2 = 5.
Formula bank
Degree of unsaturation
DU=C+1+2N−H−X
Propan-2-ol
CHX3CH(OH)CHX3
Butan-2-one
CHX3COCHX2CHX3
Methoxyethane
CHX3OCHX2CHX3
Ethyl ethanoate
CHX3COOCHX2CHX3
Propanedioic acid
HOOC−CHX2−COOH
3-Oxobutanoic acid
CHX3COCHX2COOH
Pent-1-en-4-yne
CHX2=CH−CHX2−C≡CH
Tricks & mnemonics
Roots: “Monkeys Eat Peeled Bananas”
Meth, Eth, Prop, But for C1 to C4. From C5 the roots are Greek numbers (pent, hex, hept, oct, non, dec).
Priority chant
“All Students Enjoy Holidays And Night Adventures; Kids Always Ask Every Year”: Acid, Sulfonic acid, Ester, acid Halide, Amide, Nitrile, Aldehyde, Ketone, Alcohol, Amine, then alkEne and alkYne, the order NCERT gives.
Alphabet ignores di, tri, sec and tert
“Ethyl” comes before “dimethyl” (e before m). But “isopropyl” is alphabetised under i.
Ene beats yne only in a tie
Lowest locants to multiple bonds as a set first; only if both directions tie does the double bond get the lower number.
DU in 10 seconds
Count rings + π bonds directly, or use C+1+2N−H−X. A DU of 4 or more in a formula with six or more carbons hints at a benzene ring. (This shortcut is beyond NCERT.)
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
The longest carbon chain is chosen as the parent chain, and it is numbered so that substituents get the lowest possible locants.Class 11 · Unit 8
When a molecule has more than one functional group, the principal functional group (higher priority) is named as the suffix and the others as prefixes.Class 11 · Unit 8
NCERT names CH≡C−CH=CH−CH=CHX2 hexa-1,3-dien-5-yne: when the multiple bonds get the same locants from either end, the double bonds take the lower numbers, and “ene” is written before “yne”.Class 11 · Unit 8
Substituent prefixes are arranged in alphabetical order; multiplying prefixes such as di and tri are not considered while alphabetising.Class 11 · Unit 8
When two chains of equal length are possible, the chain carrying the larger number of side chains is chosen as the parent.Class 11 · Unit 8
When alphabetising, iso and neo count as part of a substituent’s name but sec and tert do not, as in 5-sec-butyl-4-isopropyldecane; if two substituents sit in equivalent positions, the one cited first gets the lower number.Class 11 · Unit 8
Solved problems
Example 1
NEETFoundation
Give the IUPAC name of (CHX3)X3C−CHX2−CHX3.
A2,2-dimethylbutane
B3,3-dimethylbutane
Ctert-butylethane
D2-ethyl-2-methylpropane
Example 2
NEETJEE MainExam level
Name CHX3−CO−CHX2−CHX2−OH.
Example 3
JEE MainExam level
Name CHX2=CH−CHX2−C≡CH.
Example 4
JEE MainJEE AdvancedExam level
Name HOOC−CHX2−CH(CN)−CHX2−COOH.
Example 5
JEE AdvancedExam level
Find the degree of unsaturation of nitrobenzene (CX6HX5NOX2) and explain it structurally.
Practice
Q1
Single correct
NEETJEE MainFoundation
Important
The IUPAC name of CHX2=CH−C≡CH is:
Q2
One or more correct
NEETJEE MainFoundation
Important
Which are correct IUPAC names?
Q3
Single correct
NEETJEE MainExam level
Important
The IUPAC name of OHC−CHX2−CHX2−CO−CHX3 is:
Q4
Single correct
NEETJEE MainExam level
Important
The IUPAC name of CHX2=CH−CH(OH)−CHX3 is:
Q5
Single correct
JEE MainJEE AdvancedAdvanced
Important
The IUPAC name of CHX3−CH(NHX2)−CHX2−CO−CHX2−CHO is:
Q6
Single correct
NEETFoundation
The IUPAC name of CHX3CHX2CH(OH)CHX3 is:
Q7
Single correct
NEETFoundation
Which functional group has the highest priority in IUPAC nomenclature?
Q8
Numerical
JEE MainFoundation
What is the degree of unsaturation of benzene, CX6HX6?
Q9
Single correct
NEETFoundation
CHX3−O−CHX2CHX3 is named:
Q10
Numerical
JEE MainFoundation
What is the degree of unsaturation of CX7HX7NOX2?
Q11
Single correct
NEETFoundation
The IUPAC name of (CHX3)X2CH−CHX2−CH(CHX3)X2 is:
Q12
Single correct
NEETFoundation
CHX3COOCX2HX5 is named:
Q13
Single correct
NEETJEE MainFoundation
The IUPAC name of acetophenone, CX6HX5COCHX3, is:
Q14
Numerical
NEETFoundation
How many carbon atoms are in the parent chain of 3-ethyl-2-methylhexane?
Q15
Matrix match
JEE AdvancedNEETFoundation
Match the group with its suffix. Column I: (P) −CHO (Q) >C=O (ketone) (R) −CN (S) −COCl Column II: (1) nitrile (2) oyl chloride (3) al (4) one
Q16
Single correct
NEETFoundation
The IUPAC name of HOCHX2CHX2COOH is:
Q17
Single correct
NEETFoundation
The tert-butyl group is:
Q18
Single correct
NEETJEE MainExam level
The correct IUPAC name of (CHX3)X2CH−CH(CHX2CHX3)X2 is:
Q19
Numerical
JEE MainExam level
Aspirin (acetylsalicylic acid) has the molecular formula CX9HX8OX4. What is its degree of unsaturation?
Q20
Single correct
JEE MainExam level
The IUPAC name of OHC−CHX2−CHX2−CN is:
Q21
One or more correct
NEETJEE MainExam level
Which of the following are correct IUPAC names?
Q22
Matrix match
NEETJEE MainExam level
Match the common name with the IUPAC name. Column I: (P) acetone (Q) isobutyl alcohol (R) neopentane (S) acrylic acid Column II: (1) 2,2-dimethylpropane (2) prop-2-enoic acid (3) propan-2-one (4) 2-methylpropan-1-ol
Q23
Single correct
NEETJEE MainExam level
A cyclohexane ring carries two methyl groups on one ring carbon and an ethyl group on a ring carbon separated from it by one CHX2 group. The correct IUPAC name is:
Q24
Single correct
JEE MainJEE AdvancedAdvanced
The IUPAC name of HC≡C−CH=CH−CH(OH)−CHX3 is:
Q25
Numerical
JEE MainJEE AdvancedAdvanced
A hydrocarbon CX10HX16 takes up only one mole of HX2 per mole on catalytic hydrogenation. How many rings does it contain?
Q26
Numerical
JEE MainJEE AdvancedAdvanced
How many of the following are correct IUPAC names? 2-methylbut-3-ene, 3-methylbut-1-ene, 2-ethylpentane, 1,1-dimethylcyclohexane, pent-3-yn-1-ol, 2,2-dimethylpent-4-ene, 4-hydroxybutan-2-one, 2-methylpropan-2-ol
Q27
Single correct
JEE AdvancedAdvanced
A saturated bicyclic hydrocarbon has two bridgehead carbons joined by three bridges containing three, two and one carbon atoms. Its IUPAC name is:
Q28
Single correct
JEE AdvancedAdvanced
A cyclohexane ring carries a −CHO group on one ring carbon, and the ring carbon para to it (four positions round the ring) is a ketone carbonyl. The correct IUPAC name is:
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics