Energy, heat and work, and whether a reaction will happen at all: the first law, enthalpy and Hess’s law, entropy and the second law, and Gibbs energy as the final word on spontaneity
NEET · HighJEE Main · HighJEE Advanced · High
NEET style
Conceptual sign convention questions, state vs path functions, ΔH−ΔU, spontaneity from the signs of ΔH and ΔS, and Hess’s law calculations
JEE style
Work in reversible, irreversible and adiabatic paths, entropy changes, bond enthalpy and Born Haber cycles, and ΔG∘=−RTlnK linked with equilibrium and electrochemistry
Systems, state functions and processes
System
Exchanges energy?
Exchanges matter?
Example
Open
Yes
Yes
Open beaker of hot water
Closed
Yes
No
Sealed flask
Isolated
No
No
Ideal thermos flask
State functions
Depend only on the initial and final state
U, H, S, G, P, V, T
Change around a cycle is zero
Path functions
Depend on the route taken
Heat q and work w
Not zero around a cycle in general
Extensive properties depend on the amount of matter (mass, volume, U, H, S, G, heat capacity). Intensive properties do not (T, P, density, molar quantities, specific heat).
Process
Condition
Consequence
Isothermal
ΔT=0
For an ideal gas ΔU=0, so q=−w
Adiabatic
q=0
ΔU=w
Isochoric
ΔV=0
w=0 (PV work), ΔU=qV
Isobaric
ΔP=0
ΔH=qP
Cyclic
Returns to start
ΔU=ΔH=0
First law: internal energy and work
First law (IUPAC convention)
ΔU=q+w
q>0 when heat is absorbed by the system; w>0 when work is done on the system
Work against constant external pressure
w=−PextΔV
Reversible isothermal work (ideal gas)
wrev=−2.303nRTlogV1V2=−2.303nRTlogP2P1
Free expansion (into vacuum, Pext=0): w=0, whether the expansion is reversible or not. Joule found that an ideal gas expanding isothermally into vacuum absorbs no heat, so q=0 and ΔU=0.
Δng = moles of gaseous products − moles of gaseous reactants
Heat capacities
qV=nCVΔT=ΔU,qP=nCPΔT=ΔH,CP−CV=R
Gas
CV
CP
γ=CP/CV
Monatomic (He, Ar)
23R
25R
1.67
Diatomic (NX2, OX2)
25R
27R
1.40
Nonlinear polyatomic (rigid)
3R
4R
1.33
A bomb calorimeter works at constant volume and measures ΔU; a coffee cup calorimeter at constant pressure measures ΔH.
Thermochemistry and Hess’s law
Enthalpy change
Definition
Example / value
Formation ΔfH∘
1 mol of compound from elements in standard states
ΔfH∘(HX2O,l)=−285.8 kJ mol−1
Combustion ΔcH∘
1 mol burnt completely in OX2
ΔcH∘(CHX4)=−890 kJ mol−1
Neutralisation
1 mol water from HX+ and OHX−
−57.1 kJ mol−1 (strong acid + strong base)
Atomisation
Every bond in 1 mol of the substance broken to give gaseous atoms
HX2(g)2H(g): ΔaH∘=435 kJ mol−1
Fusion / vaporisation
Phase change at constant T
ΔvapH∘(HX2O)=40.79 kJ mol−1 at 373.15 K
From enthalpies of formation
ΔrH∘=∑νΔfH∘(products)−∑νΔfH∘(reactants)
Hess’s law: the enthalpy change of a reaction is the same whether it occurs in one step or many, because H is a state function. Equations can be added, reversed (sign changes) and multiplied like algebra.
From bond enthalpies (gas phase)
ΔrH=∑BE(bonds broken)−∑BE(bonds formed)
Kirchhoff’s equation
ΔHT2−ΔHT1=ΔCP(T2−T1)
Beyond NCERT; needed only for JEE Advanced style problems
Entropy and the second law
EntropyS measures how widely energy and matter are spread out. Sgas≫Sliquid>Ssolid. Entropy rises on melting, boiling, usually on dissolving, on increasing T, and when Δng>0.
Entropy change
ΔS=Tqrev,ΔStrans=TtransΔHtrans
Ideal gas, isothermal
ΔS=nRlnV1V2=2.303nRlogV1V2
Second law: for any spontaneous process, the total entropy of the universe increases: ΔStotal=ΔSsys+ΔSsurr>0, with ΔSsurr=−ΔHsys/T.
Third law (beyond the NCERT text, which only notes that entropy is lowest at 0 K): the entropy of a perfectly crystalline substance is zero at 0 K. This lets us tabulate absolute entropies S∘.
Gibbs energy and spontaneity
Gibbs energy
ΔG=ΔH−TΔS
ΔH
ΔS
Spontaneous?
−
+
At all temperatures
+
−
Never
−
−
At low temperature (T<ΔH/ΔS)
+
+
At high temperature (T>ΔH/ΔS)
Link to equilibrium
ΔG=ΔG∘+RTlnQ,ΔG∘=−RTlnK=−2.303RTlogK
Link to electrochemistry
ΔG∘=−nFEcell∘
Formula bank
First law
ΔU=q+w
Irreversible work
w=−PextΔV
Reversible isothermal work
w=−2.303nRTlogV1V2
Adiabatic work
w=nCV(T2−T1)
Reversible adiabatic
TVγ−1=const,PVγ=const
ΔH and ΔU
ΔH=ΔU+ΔngRT
Mayer’s relation
CP−CV=R
Hess / formation
ΔrH∘=∑ΔfHp∘−∑ΔfHr∘
Bond enthalpy
ΔrH=∑BEbroken−∑BEformed
Kirchhoff (beyond NCERT)
ΔH2=ΔH1+ΔCP(T2−T1)
Entropy (phase change)
ΔS=TΔH
Entropy (isothermal gas)
ΔS=2.303nRlogV1V2
Gibbs energy
ΔG=ΔH−TΔS
Equilibrium constant
ΔG∘=−2.303RTlogK
Crossover temperature
T=ΔSΔH
Tricks & mnemonics
Sign convention in one line
Think from the system’s point of view: anything coming in (heat absorbed, work done on it) is positive.
Gas moles decide ΔH − ΔU
Count only gas moles. Combustion of hydrocarbons to liquid water usually has negative Δng, so ΔH<ΔU.
Crossover temperature
When ΔH and ΔS have the same sign, the reaction switches spontaneity at T=ΔH/ΔS. Convert kJ to J first!
Adiabatic shortcut for monatomic gases
γ−1=2/3. Compressing to 1/8 of the volume multiplies T by 82/3=4.
Hess like algebra
Write the target equation first. Reverse or scale the given equations until the unwanted species cancel; apply the same operations to ΔH.
log K from ΔG° at 298 K
2.303RT≈5.71 kJ mol−1 at 298 K. So logK=−ΔG∘(kJ)/5.71.
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
In a bomb calorimeter the reaction occurs at constant volume, so the heat measured is ΔU; at constant pressure the heat measured is ΔH.Class 11 · Unit 5 (Thermodynamics)
By convention, every element in its reference form (its most stable form at 1 bar, for example graphite for carbon and rhombic sulfur) is given ΔfH∘=0.Class 11 · Unit 5
A reaction with positive ΔH and positive ΔS becomes spontaneous at high temperature.Class 11 · Unit 5
Hess’s law: because enthalpy is a state function, the standard enthalpy change of an overall reaction equals the total of the standard enthalpy changes of any set of steps that add up to it, all at the same temperature.Class 11 · Unit 5
For a spontaneous process in an isolated system, the change in entropy is positive.Class 11 · Unit 5
Solved problems
Example 1
NEETFoundation
For a reaction, ΔH=+30 kJ mol−1 and ΔS=+100 J K−1 mol−1. Above what temperature is it spontaneous?
A30 K
B300 K
C3000 K
DIt is never spontaneous
Example 2
NEETJEE MainExam level
For CX3HX8(g)+5OX2(g)3COX2(g)+4HX2O(l) at 298 K, find ΔH−ΔU.
Example 3
JEE MainExam level
2 mol of an ideal gas expand reversibly and isothermally at 300 K from 10 L to 100 L. Calculate w, q and ΔU.
Use bond enthalpies (kJ mol−1: H–H 436, Cl–Cl 243, H–Cl 431) to find ΔH for HX2(g)+ClX2(g)2HCl(g).
Example 6
JEE AdvancedAdvanced
1 mol of a monatomic ideal gas at 300 K is compressed reversibly and adiabatically to one eighth of its volume. Find the final temperature and the work done on the gas.
Example 7
JEE MainJEE AdvancedExam level
For a reaction at 298 K, ΔG∘=+11.4 kJ mol−1. Estimate its equilibrium constant.
Practice
Q1
Numerical
NEETJEE MainFoundation
Important
For NX2(g)+3HX2(g)2NHX3(g) at 300 K, what is ΔH−ΔU in kJ (two decimal places)?
Q2
Numerical
NEETJEE MainFoundation
Important
ΔH=+40 kJ mol−1, ΔS=+125 J K−1 mol−1. Above what temperature (K) is the reaction spontaneous?
Q3
Numerical
NEETJEE MainExam level
Important
Standard enthalpies of formation (kJ mol−1): CHX4(g) −74.8, COX2(g) −393.5, HX2O(l) −285.8. What is the standard enthalpy of combustion of methane in kJ mol−1 (one decimal place)?
Q4
Numerical
JEE MainJEE AdvancedAdvanced
Important
1 mol of an ideal gas at 300 K expands isothermally from 4 atm to 1 atm, once reversibly and once against a constant external pressure of 1 atm. By how many joules does the work done by the gas on the reversible path exceed that on the irreversible path? (Nearest integer; R=8.314 J K−1 mol−1)
Q5
Numerical
JEE MainJEE AdvancedAdvanced
Important
For a gas phase reaction A(g)2B(g) at 298 K, ΔH∘=+57.2 kJ mol−1 and ΔS∘=+175.8 J K−1 mol−1. What is Kp at 298 K (two decimal places)?
Q6
Single correct
NEETFoundation
Which of the following is a state function?
Q7
Single correct
NEETFoundation
For an isolated system, the change in internal energy is:
Q8
Single correct
NEETFoundation
A reaction is spontaneous at all temperatures when:
Q9
One or more correct
NEETJEE MainFoundation
Which are extensive properties?
Q10
Single correct
NEETFoundation
The enthalpy of neutralisation of acetic acid with NaOH is −55.8 kJ mol−1, less negative than −57.1 kJ mol−1, because:
Q11
Numerical
NEETJEE MainFoundation
A gas expands from 5 L to 15 L against a constant external pressure of 2 atm. What is the work done (in J)? (1 L atm = 101.3 J)
Q12
Single correct
JEE MainExam level
In a reversible adiabatic process, the entropy change of the system is:
Q13
Numerical
NEETJEE MainFoundation
ΔvapH∘ of water is 40.79 kJ mol−1 at its boiling point, 373.15 K. What is ΔvapS (J K−1 mol−1, nearest integer)?
Q14
Single correct
NEETFoundation
According to the third law of thermodynamics, the entropy of a perfectly crystalline substance at 0 K is:
Q15
Numerical
NEETFoundation
What is ΔG∘ (in kJ mol−1) for a reaction whose equilibrium constant is exactly 1?
Q16
Single correct
NEETFoundation
For one mole of an ideal gas, CP−CV equals:
Q17
Matrix match
JEE AdvancedNEETFoundation
Match the process with its defining condition (ideal gas, PV work only). Column I: (P) isothermal (Q) adiabatic (R) isochoric (S) isobaric Column II: (1) q=0 (2) ΔT=0 (3) w=0 (4) ΔP=0
Q18
Numerical
NEETJEE MainFoundation
Bond enthalpies (kJ mol−1): H–H 436, Cl–Cl 243, H–Cl 431. What is ΔH (kJ) for HX2+ClX22HCl?
Q19
Numerical
JEE MainJEE AdvancedExam level
A monatomic ideal gas at 300 K is compressed reversibly and adiabatically to 1/8 of its volume. What is the final temperature (K)?
Q20
One or more correct
NEETJEE MainExam level
For which of these reactions is ΔH<ΔU at 298 K?
Q21
Numerical
JEE MainJEE AdvancedAdvanced
1 mol of an ideal diatomic gas (CV=25R) at 300 K and 1 bar expands adiabatically against a constant external pressure of 0.5 bar until its own pressure falls to 0.5 bar. What is the final temperature in K (one decimal place)?
Q22
One or more correct
JEE MainJEE AdvancedAdvanced
1 mol of an ideal gas at 300 K doubles its volume isothermally in two ways: (i) reversibly, (ii) by free expansion into a vacuum. Which statements are correct? (Rln2=5.76 J K−1 mol−1)
Q23
Numerical
NEETJEE MainExam level
Given: ΔfH∘(CHX4,g)=−74.8 kJ mol−1, enthalpy of sublimation of graphite =716.7 kJ mol−1 and H–H bond enthalpy =436 kJ mol−1. What is the average C–H bond enthalpy in methane (kJ mol−1, nearest integer)?
Q24
Matrix match
JEE MainJEE AdvancedExam level
Match each process of an ideal gas with the statement that applies only to it. Column I: (P) reversible isothermal expansion (Q) reversible adiabatic expansion (R) free expansion into a vacuum (S) heating at constant volume Column II: (1) ΔSsys=0 (2) q=0, w=0 and ΔSsys>0 (3) ΔU=0 with q=−w=0 (4) w=0 and ΔU>0
Q25
Numerical
JEE AdvancedAdvanced
1 mol of a monatomic ideal gas is taken from 300 K and 10 L to 600 K and 5 L. What is ΔS of the gas in J K−1 (two decimal places)?
Q26
Numerical
JEE MainJEE AdvancedAdvanced
A hydrogen oxygen fuel cell runs on HX2(g)+21OX2(g)HX2O(l) with Ecell∘=1.23 V. Given ΔfH∘(HX2O,l)=−285.8 kJ mol−1 and F=96500 C mol−1, what is the maximum thermodynamic efficiency of the cell, in percent (nearest integer)?
Q27
One or more correct
NEETJEE MainExam level
Which of the following have a standard enthalpy of formation of zero at 298 K?
Q28
Numerical
JEE MainJEE AdvancedAdvanced
Use these data (kJ mol−1) to find the lattice enthalpy of NaCl, defined for NaCl(s)NaX+(g)+ClX−(g): sublimation of Na 108.4, ionisation enthalpy of Na 496, Cl–Cl bond enthalpy 242, electron gain enthalpy of Cl −348.6, ΔfH∘(NaCl,s)=−411.2. (Nearest integer)
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics