Reactions that stop changing without stopping: the equilibrium constant, Kp and Kc, the reaction quotient, degree of dissociation, Le Chatelier’s principle and the link with Gibbs energy
NEET · HighJEE Main · HighJEE Advanced · High
NEET style
Writing K expressions (including heterogeneous ones), the relation between Kp and Kc, manipulating K and qualitative Le Chatelier questions
JEE style
ICE table numericals with degree of dissociation, the vapour density method, Kp in terms of total pressure, the van’t Hoff equation and simultaneous equilibria
Dynamic equilibrium
In a closed system a reversible reaction reaches equilibrium when the forward and backward rates become equal. Concentrations then stay constant, but both reactions continue: the equilibrium is dynamic.
Equilibrium can be approached from either side.
A catalyst helps reach equilibrium faster but does not change its position.
Observable properties (colour, pressure, concentration) become constant.
Physical equilibria follow the same idea: ice ⇌ water at 0 °C and 1 atm; liquid ⇌ vapour at constant vapour pressure; a gas dissolving in a liquid follows Henry’s law: its solubility is proportional to its partial pressure above the liquid.
Law of mass action and the equilibrium constant
For aA + bB ⇌ cC + dD
Kc=[A]a[B]b[C]c[D]d,Kp=pAapBbpCcpDd
Kp and Kc
Kp=Kc(RT)Δng
Δng = gaseous moles of products − gaseous moles of reactants; NCERT expresses Kp with pressures in bar (the standard state is 1 bar) and uses R=0.0831 L bar mol−1 K−1, while with atm you would use 0.0821 L atm mol−1 K−1
In heterogeneous equilibria, pure solids and pure liquids are left out (their activity is 1): for CaCOX3(s)CaO(s)+COX2(g), Kp=pCOX2.
Change to the equation
New constant
Reverse it
1/K
Multiply coefficients by n
Kn
Divide coefficients by n
K1/n
Add two equations
K1×K2
Reaction quotient, ICE tables and degree of dissociation
The reaction quotientQ has the same form as K but uses current (not equilibrium) concentrations.
Q<K: reaction proceeds forward.
Q>K: reaction proceeds backward.
Q=K: at equilibrium.
For calculations, build an ICE table (Initial, Change, Equilibrium) in moles or concentrations, express everything with one unknown (x or the degree of dissociation α), and substitute into K.
PCl₅ ⇌ PCl₃ + Cl₂ (c mol L⁻¹, degree α)
Kc=1−αcα2,Kp=1−α2α2P
N₂O₄ ⇌ 2NO₂ (total pressure P)
Kp=1−α24α2P
Degree of dissociation from vapour density
α=(n−1)dD−d
D = theoretical vapour density (no dissociation), d = observed vapour density, n = moles of products from one mole of reactant
Le Chatelier’s principle
If a system at equilibrium is disturbed, it shifts in the direction that partly undoes the disturbance.
Change
Shift
K changes?
Add reactant / remove product
Forward
No
Increase pressure (reduce volume)
Towards fewer gas moles
No
Increase temperature
Endothermic direction
Yes: K rises for endothermic, falls for exothermic
Add catalyst
No shift (faster to equilibrium)
No
Inert gas at constant volume
No shift
No
Inert gas at constant pressure (beyond NCERT)
Towards more gas moles
No
Industrial applications
Haber process
NX2+3HX22NHX3, ΔH=−92.4 kJ
High pressure (about 200 atm) favours fewer moles
About 500 °C as a compromise: low T gives more NHX3 but too slowly (the Class 12 NCERT p block unit quotes about 700 K)
Iron catalyst (Class 12 NCERT: iron oxide with a little KX2O and AlX2OX3)
Contact process
2SOX2+OX22SOX3, exothermic
About 720 K and 2 bar (Class 12 NCERT)
VX2OX5 catalyst (platinum also works)
SOX3 absorbed in HX2SOX4 to form oleum
Equilibrium constant, Gibbs energy and temperature
Gibbs energy link
ΔG∘=−2.303RTlogK,ΔG=RTlnKQ
van’t Hoff equation
logK1K2=2.303RΔH∘(T11−T21)
Beyond the NCERT text, which states only the direction of the change; needed for JEE numericals
A large K (>103) means products dominate; a small K (<10−3) means reactants dominate; in between, both are present in significant amounts.
Formula bank
Equilibrium constant
Kc=[A]a[B]b[C]c[D]d
Relation between Kp and Kc
Kp=Kc(RT)Δng
Partial pressure
pi=xiP
Reverse reaction
K′=1/K
Scaled reaction
K′=Kn
Combined reactions
K=K1K2
Degree of dissociation (PCl₅)
Kc=1−αcα2
N₂O₄ dissociation
Kp=1−α24α2P
Vapour density method
α=(n−1)dD−d
Gibbs relation
ΔG∘=−2.303RTlogK
van’t Hoff (beyond NCERT)
logK1K2=2.303RΔH∘(T11−T21)
Tricks & mnemonics
Δn first
Before any Kp/Kc question, count Δng. If it is zero, Kp=Kc and pressure changes do nothing.
Q vs K: “Q is low, go”
If Q is lower than K, the reaction goes forward to make more product. If Q is higher, it goes back.
Small x approximation
If K is very small (< 10−3) relative to the starting concentration, assume 1−x≈1. Check afterwards that x is under 5%.
Only temperature changes K
Concentration, pressure, catalyst and inert gas move the position, never K. Only temperature changes K.
Vapour density shortcut
For a dissociation of the type A2B, α=(D−d)/d. Observed VD lower than theoretical → dissociation has happened.
Exothermic + heat = less product
Heating an exothermic equilibrium lowers K. Remember Haber: lower temperature would give more ammonia, but too slowly.
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
At equilibrium, the rates of the forward and reverse reactions become equal; the equilibrium is dynamic.Class 11 · Unit 6 (Equilibrium)
A catalyst does not change the equilibrium composition; it only helps the system reach equilibrium faster.Class 11 · Unit 6
The concentrations of pure solids and pure liquids are constant and are not written in the equilibrium expression.Class 11 · Unit 6
Le Chatelier’s principle: when a condition that fixes an equilibrium (concentration, pressure or temperature) is altered, the system responds in the direction that partly cancels the alteration.Class 11 · Unit 6
In the Haber process a low temperature favours ammonia but makes the reaction too slow, so an iron catalyst is used and the optimum conditions are about 500 °C and 200 atm. (The Class 12 p block unit quotes about 700 K and 200 atm.)Class 11 · Unit 6
Solved problems
Example 1
NEETFoundation
For NX2(g)+3HX2(g)2NHX3(g), the relation between Kp and Kc is:
AKp=Kc(RT)2
BKp=Kc(RT)−2
CKp=Kc
DKp=Kc(RT)−1
Example 2
NEETJEE MainExam level
1.0 mol of PClX5 is heated in a 1.0 L vessel. At equilibrium, 50% has dissociated. Find Kc for PClX5PClX3+ClX2.
Example 3
JEE MainExam level
For HX2(g)+IX2(g)2HI(g), Kc=57.0 at 700 K. A mixture has [HI] = 0.50 M, [HX2] = 0.10 M and [IX2] = 0.10 M. In which direction will it react?
Example 4
JEE MainExam level
The observed vapour density of a partially dissociated NX2OX4 sample is 38.3. Find the degree of dissociation for NX2OX42NOX2.
Example 5
JEE AdvancedAdvanced
NX2OX4 is 20% dissociated at a total equilibrium pressure of 1 bar. Find Kp. What would α be at 4 bar (same temperature)?
Example 6
JEE MainJEE AdvancedExam level
The equilibrium constant of a reaction doubles when the temperature rises from 300 K to 310 K. Estimate ΔH∘.
Practice
Q1
Numerical
NEETJEE MainExam level
Important
For 2SOX2+OX22SOX3, Kc=100. What is Kc for SOX3SOX2+21OX2?
Q2
Numerical
JEE MainJEE AdvancedExam level
Important
NX2OX4 is 20% dissociated at 1 bar total pressure. Find Kp (bar, three decimal places).
Q3
Numerical
NEETJEE MainExam level
Important
For HX2(g)+IX2(g)2HI(g), Kc=64 at a certain temperature. 1.0 mol of HX2 and 1.0 mol of IX2 are heated in a 1.0 L flask. How many moles of HI are present at equilibrium?
Q4
Numerical
JEE MainJEE AdvancedExam level
Important
The equilibrium constant of a reaction is 1.0×10−4 at 300 K and 1.0×10−2 at 400 K. Assuming ΔH∘ is constant over this range, what is ΔH∘ in kJ mol−1 (nearest integer)?
Q5
One or more correct
NEETJEE MainExam level
Important
NX2OX4(g)2NOX2(g), ΔH∘>0, is at equilibrium in a cylinder fitted with a piston. Which changes increase the amount (moles) of NOX2?
Q6
Single correct
NEETFoundation
For CaCOX3(s)CaO(s)+COX2(g), Kp equals:
Q7
Single correct
NEETFoundation
For which reaction is Kp=Kc?
Q8
Numerical
NEETFoundation
A reaction has Kc=4. What is Kc for the reverse reaction?
Q9
Single correct
NEETFoundation
Adding a catalyst to a reaction at equilibrium:
Q10
One or more correct
NEETJEE MainFoundation
Which equilibria shift forward when pressure is increased?
Q11
Numerical
JEE MainExam level
The vapour density of a dissociating NX2OX4 sample is 38.3. What is the percentage dissociation (one decimal place)?
Q12
Single correct
NEETFoundation
For an exothermic reaction, raising the temperature:
Q13
Numerical
NEETJEE MainFoundation
1 mol of PClX5 in 1 L dissociates 50% at equilibrium. What is Kc (mol L−1)?
Q14
Single correct
NEETFoundation
If Q>K for a reaction mixture, the reaction will:
Q15
Numerical
JEE MainFoundation
For NX2OX4(g)2NOX2(g) at 300 K, what is Kp/Kc? (R = 0.0831 L bar mol−1 K−1; two decimal places)
Q16
Single correct
JEE MainFoundation
Adding an inert gas at constant volume to an equilibrium mixture:
Q17
Matrix match
JEE AdvancedNEETFoundation
Match each reaction with its Δng. Column I: (P) NX2+3HX22NHX3 (Q) PClX5PClX3+ClX2 (R) HX2+IX22HI (S) 2NOX2NX2OX4 Column II: (1) 0 (2) +1 (3) −2 (4) −1
Q18
Numerical
JEE MainExam level
What is ΔG∘ (kJ mol−1, one decimal place) at 298 K for a reaction with K=100?
Q19
Numerical
JEE MainJEE AdvancedAdvanced
When PClX5 (molar mass 208.5 g mol−1) dissociates as PClX5(g)PClX3(g)+ClX2(g), the average molar mass of the equilibrium mixture at a total pressure of 1 bar is 139 g mol−1. What is Kp in bar (two decimal places)?
Q20
Numerical
JEE MainJEE AdvancedAdvanced
Solid NHX4HS is placed in a flask that already contains NHX3 at 0.50 bar. For NHX4HS(s)NHX3(g)+HX2S(g), Kp=0.11 bar2. What is the total pressure at equilibrium in bar (two decimal places)?
Q21
Numerical
JEE AdvancedAdvanced
Two solids decompose in the same closed, initially evacuated vessel at a fixed temperature: X(s)A(g)+B(g) with Kp1=0.06 bar2, and Y(s)A(g)+C(g) with Kp2=0.03 bar2. Both solids remain present. What is the total pressure at equilibrium in bar?
Q22
Numerical
JEE MainJEE AdvancedAdvanced
A metal carbonate decomposes as MCOX3(s)MO(s)+COX2(g). Take ΔH∘=+176 kJ mol−1 and ΔS∘=+160 J K−1 mol−1, both independent of temperature. What is the equilibrium pressure of COX2 over the solids at 1000 K, in bar (three decimal places)? (R=8.314 J K−1 mol−1)
Q23
Numerical
JEE MainJEE AdvancedAdvanced
SOX3 is 40% dissociated by 2SOX3(g)2SOX2(g)+OX2(g) at a total equilibrium pressure of 1.0 bar. What is Kp in bar (three decimal places)?
Q24
One or more correct
NEETJEE MainExam level
Which statements are correct?
Q25
Matrix match
NEETJEE MainJEE AdvancedExam level
PClX5(g)PClX3(g)+ClX2(g), ΔH∘>0, is at equilibrium. Match each change with its effect. Column I: (P) temperature raised at constant volume (Q) volume halved at constant temperature (R) helium added at constant volume (S) helium added at constant total pressure Column II: (1) Kc unchanged and the amount of PClX5 increases (2) Kc increases (3) no change in any amount (4) Kc unchanged and the amount of PClX3 increases
Q26
One or more correct
JEE AdvancedAdvanced
For PClX5(g)PClX3(g)+ClX2(g) at a fixed temperature, with a small degree of dissociation α, which statements are correct? (Molar mass of PClX5 = 208.5 g mol−1)
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics