Physical Chemistry

Surface Chemistry

Chemistry that happens at boundaries, covering adsorption and its isotherms, catalysis including enzymes and zeolites, and colloids with their types, preparation, properties, coagulation and emulsions

NEET style

Removed from the rationalised NCERT Class 12 book and from the NEET UG syllabus from 2024, so it matters only for older papers, which asked facts such as the Hardy Schulze rule, gold number, emulsions and the Tyndall effect

JEE style

Dropped from JEE Main from 2024 but still in JEE Advanced, which asks Freundlich isotherm graphs, physisorption versus chemisorption with temperature, coagulation values and colloid charge, mostly as statement questions

Adsorption

Adsorption is the accumulation of molecules on a surface (adsorbate on adsorbent); absorption is uniform distribution through the bulk. Water vapour is adsorbed on silica gel but absorbed by anhydrous CaClX2\ce{CaCl2}. Adsorption is exothermic and lowers entropy, so it is spontaneous only because ΔH\Delta H is negative; it stops (equilibrium) when ΔH=TΔS\Delta H = T\Delta S.

FeaturePhysisorptionChemisorption
Forcesvan der WaalsChemical bonds
Enthalpy20 to 40 kJ mol−1^{-1}80 to 240 kJ mol−1^{-1}
SpecificityNot specificHighly specific
ReversibilityReversibleUsually irreversible
LayersMultilayerMonolayer
Effect of temperatureDecreases as T risesFirst increases (needs activation), then decreases
Gas favouredEasily liquefiable (high TcT_c)Gas that can bond to the surface

Extent of adsorption increases with surface area (finely divided metals, activated charcoal) and with pressure (at low temperature).

Adsorption isotherms

Freundlich isotherm
xm=kP1/n (n>1),log⁡xm=log⁡k+1nlog⁡P\frac{x}{m} = kP^{1/n}\ (n > 1),\qquad \log\frac{x}{m} = \log k + \frac1n\log P

A plot of log⁡(x/m)\log(x/m) vs log⁡P\log P is a straight line with slope 1/n1/n and intercept log⁡k\log k; it holds only over limited pressure ranges

Langmuir isotherm (monolayer)
xm=aP1+bP,θ=bP1+bP\frac{x}{m} = \frac{aP}{1+bP},\qquad \theta = \frac{bP}{1+bP}

At low PP, x/m≈aPx/m \approx aP (first order in PP); at high PP, x/m→a/bx/m \to a/b (saturation, zero order)

Langmuir linear form
Px/m=1a+baP\frac{P}{x/m} = \frac1a + \frac{b}{a}P

Slope b/ab/a and intercept 1/a1/a give both constants

From solution
xm=kC1/n\frac{x}{m} = kC^{1/n}
  • Gas masks (activated charcoal adsorbs poisonous gases).
  • Decolourising cane sugar syrup with animal charcoal.
  • Chromatography, froth flotation of sulfide ores, and heterogeneous catalysis.
  • Silica gel and alumina as desiccants to control humidity.

Catalysis

ProcessCatalystType
Haber (NHX3\ce{NH3})Fe with Mo promoterHeterogeneous
Ostwald (HNOX3\ce{HNO3})Pt gauzeHeterogeneous
Contact (HX2SOX4\ce{H2SO4})VX2OX5\ce{V2O5} (or platinised asbestos)Heterogeneous
Hydrogenation of oilsFinely divided NiHeterogeneous
Lead chamber (HX2SOX4\ce{H2SO4})NOHomogeneous
Ester hydrolysisHX+\ce{H+}Homogeneous

Adsorption theory of heterogeneous catalysis: reactants diffuse to the surface, adsorb (loosening their bonds), react, and the products desorb and diffuse away. Promoters enhance activity (Mo for Fe); poisons destroy it (arsenic in the contact process).

Shape selective catalysis: zeolites (microporous aluminosilicates) such as ZSM-5 let only molecules of the right size react; ZSM-5 converts alcohols directly into gasoline by dehydrating them.

EnzymeReaction
InvertaseSucrose → glucose + fructose
ZymaseGlucose → ethanol + COX2\ce{CO2}
DiastaseStarch → maltose
MaltaseMaltose → glucose
UreaseUrea → NHX3\ce{NH3} + COX2\ce{CO2}
Pepsin / trypsinProteins → peptides / amino acids

Colloids: types and classification

A colloid is a heterogeneous system in which particles of size 1 to 1000 nm (dispersed phase) are spread through a dispersion medium. True solutions have particles < 1 nm; suspensions > 1000 nm.

Dispersed phaseMediumNameExamples
SolidLiquidSolPaints, cell fluids, gold sol
SolidGasAerosolSmoke, dust
LiquidGasAerosolFog, mist, clouds
LiquidLiquidEmulsionMilk, hair cream
LiquidSolidGelCheese, butter, jellies
GasLiquidFoamFroth, whipped cream, soap lather
GasSolidSolid sol / foamPumice stone, foam rubber
SolidSolidSolid solColoured glass, gem stones

Lyophilic (solvent loving)

  • Starch, gum, gelatin, proteins
  • Formed directly by mixing
  • Reversible; very stable
  • Not easily coagulated

Lyophobic (solvent hating)

  • Metal sols, AsX2SX3\ce{As2S3}, Fe(OH)X3\ce{Fe(OH)3}
  • Need special methods to prepare
  • Irreversible; less stable
  • Easily coagulated by electrolytes

Associated colloids (micelles): soaps and detergents behave as normal electrolytes at low concentration but form micelles above the critical micelle concentration (CMC) and above the Kraft temperature. Soap cleans by trapping grease inside micelles with the hydrocarbon tails inward.

Preparation, purification and properties of colloids

  • Double decomposition: AsX2OX3+3 HX2S→AsX2SX3(sol)+3 HX2O\ce{As2O3 + 3H2S -> As2S3(sol) + 3H2O}.
  • Hydrolysis: FeClX3+3 HX2O→boilFe(OH)X3(sol)+3 HCl\ce{FeCl3 + 3H2O ->[boil] Fe(OH)3(sol) + 3HCl}.
  • Reduction: gold sol from AuClX3\ce{AuCl3} with formaldehyde or SnClX2\ce{SnCl2}.
  • Bredig’s arc method: an electric arc between metal electrodes under water gives Au, Ag, Pt sols.
  • Peptization: a fresh precipitate is converted into a sol by shaking with a small amount of electrolyte, usually one with a common ion.

Purification: dialysis (ions pass through a parchment/cellophane membrane), electrodialysis (faster, with an electric field) and ultrafiltration.

  • Tyndall effect: scattering of light makes the beam path visible (only if particle size is comparable to the wavelength and refractive indices differ).
  • Brownian movement: zigzag motion caused by unbalanced bombardment by medium molecules; its stirring effect helps keep sols from settling.
  • Charge: Fe(OH)X3\ce{Fe(OH)3} (made in hot water), Al(OH)X3\ce{Al(OH)3} and basic dye sols are positive; metal sols, AsX2SX3\ce{As2S3}, starch and clay are negative. The charge comes mainly from preferential adsorption of an ion common to the particle, so AgI is negative in excess IX−\ce{I-} and positive in excess AgX+\ce{Ag+}.
  • Electrophoresis: colloidal particles move towards the oppositely charged electrode in an electric field; if the particles are held still, the medium moves instead (electroosmosis).
Hardy Schulze rule
coagulating power↑ with charge of the opposite ion:  AlX3+>BaX2+>NaX+ (negative sol); [Fe(CN)X6]X4−>POX4X3−>SOX4X2−>ClX− (positive sol)\text{coagulating power}\uparrow\ \text{with charge of the opposite ion: }\ \ce{Al^3+} > \ce{Ba^2+} > \ce{Na+}\ (\text{negative sol});\ \ce{[Fe(CN)6]^4-} > \ce{PO4^3-} > \ce{SO4^2-} > \ce{Cl-}\ (\text{positive sol})

Coagulation value (flocculation value): minimum millimoles of electrolyte per litre of sol needed for coagulation in 2 h. The smaller the coagulation value, the greater the coagulating power.

Protective colloids: lyophilic colloids protect lyophobic sols. Gold number = milligrams of protective colloid that just prevent coagulation of 10 mL of gold sol by 1 mL of 10% NaCl. Smaller gold number → better protection (gelatin 0.005 to 0.01; starch 15 to 25).

Emulsions: oil in water (milk, vanishing cream) and water in oil (butter, cold cream). Emulsifying agents: proteins, gums, soaps (O/W) and heavy metal salts of fatty acids, long chain alcohols, lampblack (W/O).

Formula bank

Freundlich isotherm

xm=kP1/n\frac{x}{m} = kP^{1/n}

Freundlich (log form)

log⁡xm=log⁡k+1nlog⁡P\log\frac{x}{m} = \log k + \frac1n\log P

Langmuir isotherm

xm=aP1+bP\frac{x}{m} = \frac{aP}{1+bP}

Langmuir linear form

Px/m=1a+baP\frac{P}{x/m} = \frac1a + \frac{b}{a}P

Fraction of surface covered

θ=bP1+bP\theta = \frac{bP}{1+bP}

From solution

xm=kC1/n\frac{x}{m} = kC^{1/n}

Coagulation value

CV=mmol of electrolytetotal volume (L)\text{CV} = \frac{\text{mmol of electrolyte}}{\text{total volume (L)}}

Size ranges

solution<1 nm<colloid<1000 nm<suspension\text{solution} < 1\,\text{nm} < \text{colloid} < 1000\,\text{nm} < \text{suspension}

Tricks & mnemonics

Physisorption cold, chemisorption warm

Physisorption is best at low temperature. Chemisorption needs a kick of heat first (activation) and then falls off.

Opposite charge, higher valence

Hardy Schulze rule: only the ion opposite in charge to the sol coagulates it, and its power rises steeply with valence.

Gold number: golf scoring

Like golf, the lowest gold number wins, so gelatin is the best protector.

Emulsion clue

Butter and cold cream are “water inside oil” (W/O); milk and vanishing cream are “oil inside water” (O/W).

Positive sols are few

Remember the short positive list: hydrated metal oxides (Fe(OH)X3\ce{Fe(OH)3}, Al(OH)X3\ce{Al(OH)3}), basic dyes, haemoglobin. Almost everything else is negative.

Which ion is in excess?

A sol particle grabs the ion it shares with the solution that is in excess. AgI made in excess KI is AgI/IX−\ce{AgI/I-} (negative); made in excess AgNOX3\ce{AgNO3} it is AgI/AgX+\ce{AgI/Ag+} (positive).

NCERT high yield lines

Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.

  • Raising the temperature steadily reduces physical adsorption, but chemical adsorption first grows (it needs activation) and only later falls.Class 12 · Surface Chemistry (earlier edition)
  • Hardy Schulze rule: an ion opposite in charge to the sol does the coagulating, and the higher its charge, the stronger its effect.Class 12 · Surface Chemistry (earlier edition)
  • A lyophilic colloid added to a lyophobic sol forms a layer around its particles and shields them from electrolytes; colloids used this way are called protective colloids.Class 12 · Surface Chemistry (earlier edition)
  • Lyophilic sols can be remade simply by adding the medium again and are quite stable; lyophobic sols, once coagulated, cannot be remade this way and need stabilising agents.Class 12 · Surface Chemistry (earlier edition)
  • A light beam is scattered visibly by a colloid only if the particles are not much smaller than the wavelength used and the two phases differ markedly in refractive index.Class 12 · Surface Chemistry (earlier edition)

Solved problems

Example 1
NEETFoundation
For a Freundlich isotherm, the plot of log⁡(x/m)\log(x/m) vs log⁡P\log P has slope 0.5 and intercept 0.3010. Find x/mx/m at PP = 4 atm.
  1. A1
  2. B2
  3. C4
  4. D8
Example 2
NEETFoundation
Arrange NaCl\ce{NaCl}, BaClX2\ce{BaCl2} and AlClX3\ce{AlCl3} in increasing coagulating power for a negatively charged AsX2SX3\ce{As2S3} sol.
Example 3
JEE MainExam level
2.0 mL of 0.50 M NaCl is just enough to coagulate 98 mL of a sol (total volume 100 mL) in 2 hours. Find the coagulation value of NaCl.
Example 4
JEE MainExam level
Explain why physisorption of a gas falls with temperature, while chemisorption of the same gas on a metal first rises and then falls.
Example 5
JEE AdvancedAdvanced
For Langmuir adsorption with a=0.4a = 0.4 and b=0.2b = 0.2 atm−1^{-1}, find x/mx/m and the fraction of surface covered at PP = 5 atm. What is the limiting value of x/mx/m?

Practice

Q1
Single correct
NEETFoundation
Important
In the Freundlich isotherm, the slope of log⁡(x/m)\log(x/m) vs log⁡P\log P equals:
Q2
Single correct
NEETFoundation
Important
Which ion is most effective in coagulating a positively charged Fe(OH)X3\ce{Fe(OH)3} sol?
Q3
Numerical
JEE MainExam level
Important
2 mL of 0.5 M NaCl coagulates a sol, making the total volume 100 mL. What is the coagulation value (mmol L−1^{-1})?
Q4
One or more correct
NEETJEE MainJEE AdvancedExam level
Important
Which statements comparing physisorption and chemisorption are correct?
Q5
Single correct
JEE MainJEE AdvancedAdvanced
Important
A silver iodide sol is prepared by adding AgNOX3\ce{AgNO3} solution slowly to an excess of KI solution. Which electrolyte will have the lowest coagulation value for this sol?
Q6
Single correct
NEETFoundation
Chemisorption is:
Q7
Numerical
NEETJEE MainFoundation
For Freundlich adsorption with kk = 2 and nn = 2, find x/mx/m at PP = 9 atm.
Q8
Single correct
NEETFoundation
The Tyndall effect is due to:
Q9
One or more correct
NEETFoundation
Which form lyophilic sols?
Q10
Single correct
NEETFoundation
Butter is an example of:
Q11
Single correct
NEETFoundation
Which protective colloid has the smallest gold number?
Q12
Single correct
NEETFoundation
ZSM-5 converts alcohols directly into gasoline. This is an example of:
Q13
Single correct
NEETFoundation
The enzyme that converts urea into ammonia and carbon dioxide is:
Q14
Numerical
JEE AdvancedExam level
In Langmuir adsorption with bb = 0.2 atm−1^{-1}, what percentage of the surface is covered at 5 atm?
Q15
Matrix match
NEETJEE AdvancedFoundation
Match each colloid with its type.
Column I: (P) fog (Q) milk (R) smoke (S) cheese
Column II: (1) solid in gas (2) liquid in gas (3) liquid in liquid (4) liquid in solid (gel)
Q16
Single correct
NEETFoundation
Micelles of soap form in water only:
Q17
Single correct
NEETFoundation
The movement of colloidal particles under an applied electric field is called:
Q18
Numerical
NEETJEE MainExam level
A gas obeys the Freundlich isotherm on a solid. At constant temperature, x/mx/m = 0.20 at 1.0 atm and 0.40 at 16 atm. Find nn in x/m=kP1/nx/m = kP^{1/n}.
Q19
Numerical
JEE MainExam level
For a negatively charged AsX2SX3\ce{As2S3} sol, the coagulation values (mmol L−1^{-1}) found in one experiment are NaCl 52, BaClX2\ce{BaCl2} 0.69 and AlClX3\ce{AlCl3} 0.093. How many times greater (nearest integer) is the coagulating power of AlClX3\ce{AlCl3} than that of NaCl?
Q20
Matrix match
NEETJEE AdvancedExam level
Match the colloid preparation with the method.
Column I: (P) AsX2SX3\ce{As2S3} sol from AsX2OX3\ce{As2O3} and HX2S\ce{H2S} (Q) Fe(OH)X3\ce{Fe(OH)3} sol by adding FeClX3\ce{FeCl3} to boiling water (R) gold sol from AuClX3\ce{AuCl3} and formaldehyde (S) platinum sol by striking an arc between Pt electrodes under water
Column II: (1) reduction (2) hydrolysis (3) double decomposition (4) Bredig’s arc method
Q21
One or more correct
NEETJEE MainExam level
Which of these sols are positively charged?
Q22
Numerical
JEE MainJEE AdvancedExam level
25 mg of a protective colloid is dissolved in 100 mL of water. The least volume of this solution that, added to 10 mL of a standard gold sol, just prevents its coagulation by 1 mL of 10% NaCl is 2.0 mL. What is the gold number of the colloid?
Q23
Numerical
JEE AdvancedAdvanced
A gas obeys the Langmuir isotherm on a solid. The fraction of surface covered is 0.40 at 2.0 atm. At what pressure (atm) will 80% of the surface be covered at the same temperature?
Q24
Numerical
JEE MainJEE AdvancedAdvanced
3.0 g of activated charcoal is shaken with 100 mL of 0.50 M acetic acid; at equilibrium the acid concentration is 0.40 M. The adsorption follows x/m=kC1/2x/m = kC^{1/2}. What equilibrium concentration (mol L−1^{-1}, one decimal place) would be needed for x/mx/m to reach 0.40 g of acid per g of charcoal? (Molar mass of acetic acid = 60 g mol−1^{-1})
Q25
One or more correct
JEE MainJEE AdvancedAdvanced
For the adsorption of a gas on a solid surface, which statements are correct?
Q26
Numerical
JEE AdvancedAdvanced
For a gas obeying the Langmuir isotherm x/m=aP1+bPx/m = \dfrac{aP}{1+bP}, a plot of P/(x/m)P/(x/m) against PP (P in atm) is a straight line with slope 0.50 and intercept 2.0. At what pressure (atm) does x/mx/m reach half of its limiting value?
Q27
One or more correct
JEE AdvancedAdvanced
Which statements about soap micelles in water are correct?

Ready for the real thing?

Take a timed, NTA style test on this chapter with instant analytics