Gases, liquids and the forces between molecules, covering gas laws, Dalton and Graham, kinetic theory and molecular speeds, real gases and the van der Waals equation, critical constants and phase diagrams
NEET · LowJEE Main · LowJEE Advanced · High
NEET style
Not in the rationalised NCERT Class 11 book or the NEET UG syllabus from 2024, so it is rarely asked directly, though gas laws are still needed in thermodynamics, equilibrium and solutions
JEE style
Dropped from the JEE Main syllabus from 2024 but still in JEE Advanced, which favours real gas analysis with compressibility factor graphs, van der Waals constants, Boyle and critical temperatures and molecular speed ratios
Intermolecular forces
The state of a substance is a balance between intermolecular attractions (pulling molecules together) and thermal energy (pushing them apart).
NCERT groups dispersion, dipole dipole and dipole induced dipole forces as van der Waals forces and treats hydrogen bonding, a strong dipole dipole interaction, separately
Force
Between
Example
Relative strength
Ion dipole
Ion and polar molecule
NaX+ in water
Strong; not counted as a van der Waals force
Hydrogen bond
H on F/O/N and a lone pair on F/O/N
HX2O, HF, NHX3
Strongest of these; 10 to 100 kJ mol−1
Dipole dipole
Polar molecules
HCl, SOX2
Stronger than London forces; energy ∝ 1/r3 between stationary molecules (solids), 1/r6 between rotating ones
Dipole induced dipole
Polar + nonpolar
HCl with Ar
Weak; energy ∝ 1/r6
London dispersion
All atoms and molecules (temporary dipoles)
He, CHX4, IX2
Weak; energy ∝ 1/r6; important only at short range (about 500 pm); grows with polarisability
Gas laws and the ideal gas equation
Law
Constant
Relation
Boyle
n, T
PV = constant
Charles
n, P
V/T = constant
Gay Lussac
n, V
P/T = constant
Avogadro
P, T
V/n = constant
Ideal gas equation
PV=nRTd=RTPM
At STP (273.15 K and 1 bar) Vm=22.71098 L mol−1 and R=8.314 J K−1 mol−1 = 0.08314 bar L K−1 mol−1 (NCERT); at 0 °C and 1 atm, Vm=22.414 L mol−1 and R=0.0821 L atm K−1 mol−1
Combined gas law
T1P1V1=T2P2V2
Dalton’s law of partial pressures
Ptotal=∑pi,pi=xiPtotal
A gas collected over water: pdry gas=Ptotal−aqueous tension
Graham’s law of diffusion (beyond NCERT)
r2r1=M1M2=d1d2
Rate can be volume per time or moles per time; for equal volumes effusing, t1/t2=M1/M2
Kinetic theory and molecular speeds
Gas particles are so small and so far apart that their own volume is negligible; they are treated as point masses.
There is no force of attraction between the particles at ordinary temperature and pressure.
Particles move constantly and randomly in straight lines; their collisions with the walls produce the pressure.
Collisions are perfectly elastic: the total energy stays the same.
Particles have different speeds, but the distribution of speeds stays constant at a given temperature.
Average kinetic energy is directly proportional to absolute temperature.
Kinetic gas equation
PV=31mNurms2
Average kinetic energy
Eˉmolecule=23kT,Eˉmole=23RT
Molecular speeds
ump=M2RT,uavg=πM8RT,urms=M3RT
Ratio ump:uavg:urms=1:1.128:1.224; use M in kg mol−1 with R=8.314
Real gases and the van der Waals equation
Compressibility factor
Z=nRTPV
Z=1: ideal behaviour; every real gas approaches it as the pressure approaches zero.
Z<1: attractive forces dominate and the gas is more compressible than ideal; most gases show this at intermediate pressures.
Z>1: repulsive (size) effects dominate and the gas is harder to compress; all gases show this at high pressure, and HX2 and He show it at all pressures near room temperature.
van der Waals equation
(P+V2an2)(V−nb)=nRT
a (L2 atm mol−2) measures the attractive forces and does not depend on temperature or pressure; NCERT describes nb as roughly the volume occupied by the molecules themselves (more exactly, beyond NCERT, b is about 4× the actual volume of one mole of molecules)
Real gases behave ideally at low pressure and high temperature. The Boyle temperature is the temperature at which a real gas obeys the ideal gas law over an appreciable range of pressure; above it Z>1, below it Z first falls with pressure, passes a minimum and then rises. Beyond NCERT: at low pressure the b term is negligible, Z=1−VRTa; at high pressure the a term is negligible, Z=1+RTPb.
Characteristic temperatures (beyond NCERT)
TB=Rba,Tc=27Rb8a,Pc=27b2a,Vc=3b,Zc=83
The critical temperatureTc is the highest temperature at which a gas can be liquefied; above it no pressure is enough. For COX2 (Andrews’ isotherms) Tc = 30.98 °C, where liquid first appears at about 73 atm. NCERT values of Tc: HX2 33.2 K, He 5.3 K, NX2 126 K, OX2 154.3 K, COX2 304.10 K, NHX3 405.5 K, HX2O 647.1 K. Stronger attraction means a higher Tc and easier liquefaction (beyond NCERT: Tc∝a/b and TB=827Tc).
Liquids and phase diagrams
Property
Definition
Effect of rising temperature
Vapour pressure
Pressure of vapour in equilibrium with liquid
Increases; liquid boils when it equals external pressure (normal boiling point at 1 atm, standard boiling point at 1 bar: water 100 °C and 99.6 °C)
Surface tension
Force per unit length at the surface (N m−1)
Decreases
Viscosity
Resistance to flow (N s m−2 = Pa s; 1 poise = 0.1 Pa s)
Decreases for liquids
Beyond NCERT: a phase diagram shows which phase is stable at each (T,P). Lines are phase boundaries where two phases coexist; the triple point is where solid, liquid and vapour coexist (water: 273.16 K, 611.66 Pa ≈ 4.58 mm Hg); the boundary between liquid and vapour ends at the critical point (water: 647.1 K, 220.6 bar, NCERT Table 5.4).
Formula bank
Ideal gas equation
PV=nRT
Density of a gas
d=RTPM
Combined gas law
T1P1V1=T2P2V2
Partial pressure
pi=xiPtotal
Graham’s law (beyond NCERT)
r2r1=M1M2
Average KE (beyond NCERT)
Eˉ=23kT
rms speed (beyond NCERT)
urms=M3RT
Average speed (beyond NCERT)
uavg=πM8RT
Most probable speed (beyond NCERT)
ump=M2RT
Compressibility factor
Z=nRTPV
van der Waals equation
(P+V2an2)(V−nb)=nRT
Boyle temperature (beyond NCERT)
TB=Rba
Critical temperature (beyond NCERT)
Tc=27Rb8a
Critical pressure & volume (beyond NCERT)
Pc=27b2a,Vc=3b
Tricks & mnemonics
Speed ratio 1 : 1.13 : 1.22
ump:uavg:urms=2:8/π:3≈1:1.128:1.224. “Most Are Rare”: mp < avg < rms.
Equal speeds trick
Two gases have equal molecular speeds when T/M is equal. He (M = 4) at 50 K moves as fast as OX2 (M = 32) at 400 K.
Read Z like a story
Z dips below 1 → attraction wins. Z climbs above 1 → size wins. At very high pressure, size always wins.
Graham with times
Effusion time for equal volumes is proportional to M, the opposite of rate.
Critical constants from a and b
Remember Vc=3b first. Then Pc=a/27b2 and Tc=8a/27Rb follow, and PcVc/RTc=3/8.
Easy liquefaction
Higher Tc (proportional to a/b) → easier to liquefy: NHX3>COX2>CHX4>OX2>NX2>HX2>He. Rank by Tc (or a/b), not by a alone.
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
Boyle’s law: for a fixed amount of gas kept at constant temperature, pressure and volume are inversely proportional, so pV stays constant.Class 11 · States of Matter (earlier edition)
For a gas collected over water, the pressure of the dry gas = total pressure − aqueous tension (vapour pressure of water at that temperature).Class 11 · States of Matter (earlier edition)
Real gases deviate from ideal behaviour most at high pressure and low temperature.Class 11 · States of Matter (earlier edition)
Critical temperature is the highest temperature at which a gas can be liquefied by applying pressure.Class 11 · States of Matter (earlier edition)
Surface tension and viscosity of liquids decrease as temperature increases.Class 11 · States of Matter (earlier edition)
Solved problems
Example 1
NEETFoundation
How many moles of gas are in a 10.0 L cylinder at 27 °C and 2.00 atm? (R=0.0821 L atm mol−1 K−1)
A0.41 mol
B0.81 mol
C1.62 mol
D8.1 mol
Example 2
NEETJEE MainFoundation
Compare the rates of diffusion of HX2 and OX2 under identical conditions.
Example 3
JEE MainExam level
Calculate the rms speed of NX2 molecules at 300 K.
Example 4
JEE MainExam level
A mixture contains 8 g of OX2 and 4 g of HX2 at a total pressure of 1 atm. Find the partial pressure of OX2.
Example 5
JEE AdvancedAdvanced
For COX2, a=3.59 L2 atm mol−2 and b=0.0427 L mol−1. Estimate its critical temperature and Boyle temperature.
Example 6
JEE MainJEE AdvancedExam level
For a real gas, Z=0.8 at 300 K and 10 atm. Is the molar volume larger or smaller than the ideal value? Which force dominates?
Practice
Q1
Numerical
JEE MainExam level
Important
At what temperature (in K) will helium have the same rms speed as OX2 at 400 K?
Q2
One or more correct
JEE AdvancedExam level
Important
Which statements about the compressibility factor Z are correct?
Q3
Numerical
JEE AdvancedExam level
Important
A gas has a=3.59 L2 atm mol−2 and b=0.0427 L mol−1. Find Tc (in K, nearest integer). (R = 0.0821)
Q4
Numerical
JEE MainExam level
Important
Calculate the rms speed (m s−1, nearest whole number) of OX2 at 300 K. (R = 8.314)
Q5
Numerical
JEE AdvancedAdvanced
Important
Using the van der Waals equation, calculate the pressure (in atm, one decimal place) exerted by 1.00 mol of COX2 in a 1.00 L vessel at 300 K. (a=3.59 L2 atm mol−2, b=0.0427 L mol−1, R=0.0821 L atm mol−1 K−1)
Q6
Single correct
JEE MainFoundation
The units of the van der Waals constant a are:
Q7
Numerical
NEETJEE MainFoundation
What is the density of OX2 (in g L−1, two decimal places) at 273 K and 1 atm? (R = 0.0821)
Q8
Single correct
JEE MainFoundation
The ratio ump:uavg:urms for a gas is:
Q9
Single correct
NEETFoundation
At constant temperature, doubling the pressure on a fixed mass of gas makes its volume:
Q10
Numerical
NEETFoundation
What volume (in L, two decimal places) does 4.4 g of COX2 occupy at 273 K and 1 atm?
Q11
Single correct
NEETFoundation
Which gas diffuses the fastest under the same conditions?
Q12
Single correct
NEETFoundation
The average kinetic energy per mole of an ideal gas depends on:
Q13
Single correct
NEETJEE MainFoundation
Which gas is the easiest to liquefy?
Q14
Numerical
NEETJEE MainFoundation
16 g of OX2 and 14 g of NX2 are mixed at a total pressure of 3 atm. What is the partial pressure (atm) of OX2?
Q15
Matrix match
JEE AdvancedNEETFoundation
Match the pair with the main attractive force between them. Column I: (P) He and He (Q) HCl and HCl (R) HX2O and HX2O (S) NaX+ and HX2O Column II: (1) ion dipole (2) London dispersion (3) dipole dipole (4) hydrogen bonding
Q16
Single correct
JEE MainFoundation
At the triple point of water:
Q17
Numerical
JEE AdvancedExam level
A certain volume of gas X effuses through a pinhole in 60 s. The same volume of OX2 effuses through it in 40 s under identical conditions. What is the molar mass of X (g mol−1)?
Q18
Numerical
JEE AdvancedExam level
250 mL of hydrogen is collected over water at 27 °C when the total pressure is 760 mm Hg. The aqueous tension at 27 °C is 27 mm Hg. How many millimoles of dry hydrogen were collected (two decimal places)? (R=0.0821 L atm mol−1 K−1)
Q19
Numerical
JEE AdvancedExam level
An open flask contains air at 27 °C. It is heated to 127 °C at constant pressure. What percentage of the air originally present is driven out of the flask?
Q20
Numerical
JEE AdvancedAdvanced
At what temperature (in K, nearest whole number) will the rms speed of SOX2 molecules equal the average speed of OX2 molecules at 300 K?
Q21
One or more correct
JEE AdvancedAdvanced
Which statements about real gases are correct?
Q22
Single correct
JEE AdvancedExam level
The correct order of boiling points of the isomeric pentanes is:
Q23
Numerical
JEE AdvancedAdvanced
A mixture of He and CHX4 in the mole ratio 1 : 2 effuses through a small hole. What is the mole fraction of He in the gas that first escapes (two decimal places)?
Q24
Matrix match
JEE AdvancedExam level
Match each quantity with its expression in terms of the van der Waals constants. Column I: (P) Boyle temperature (Q) critical temperature (R) critical pressure (S) critical molar volume Column II: (1) a/27b2 (2) 3b (3) a/Rb (4) 8a/27Rb
Q25
Numerical
JEE AdvancedExam level
What is the total translational kinetic energy (in J, nearest whole number) of 4.0 g of helium at 27 °C? (R=8.314 J K−1 mol−1)
Q26
Numerical
JEE MainJEE AdvancedAdvanced
At a certain temperature, an equilibrium mixture from NX2OX42NOX2 has a vapour density of 38.33. What is the degree of dissociation of NX2OX4 (two decimal places)?
Q27
Numerical
JEE AdvancedExam level
A 2.0 L bulb of NX2 at 1.0 atm is connected to a 3.0 L bulb of OX2 at 2.0 atm at the same constant temperature. What is the partial pressure of OX2 (in atm, one decimal place) after mixing?
Q28
Numerical
JEE AdvancedAdvanced
At 273 K and 100 atm the compressibility factor of a gas is 2.0. Assuming the attraction term is negligible, estimate the van der Waals constant b (in L mol−1, three decimal places). (R=0.0821 L atm mol−1 K−1)
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics