Every number in chemistry carries a unit and an uncertainty, so this chapter covers the SI system, unit conversion without mistakes and reporting answers with the right number of significant figures
NEET · MediumJEE Main · MediumJEE Advanced · Low
NEET style
One direct question on significant figures, SI units or rounding off, usually straight from NCERT
JEE style
Rarely asked alone; unit conversions (L atm ↔ J, °C ↔ K, eV ↔ J) appear inside thermodynamics, gas, kinetics and atomic structure numericals
Matter and its classification
Anything that has mass and occupies space is matter. It exists as solid, liquid or gas, and chemically it is either a pure substance or a mixture.
Pure substances
Fixed composition
Elements (one kind of atom): Cu, OX2
Compounds (elements in a fixed ratio): HX2O, COX2
Components cannot be separated by physical methods
Mixtures
Variable composition
Homogeneous: uniform throughout (air, sugar solution, brass)
Heterogeneous: nonuniform (sand + iron filings, oil + water)
Components can be separated by physical methods
Physical properties (colour, odour, melting point, boiling point, density) can be measured or observed without changing the identity or composition of the substance. Chemical properties (acidity or basicity, combustibility) can be observed only through a chemical change.
The SI system
The International System of Units (SI) is built on seven base units. Every other unit is derived from them.
The seven SI base units
Quantity
Unit
Symbol
Length
metre
m
Mass
kilogram
kg
Time
second
s
Electric current
ampere
A
Thermodynamic temperature
kelvin
K
Amount of substance
mole
mol
Luminous intensity
candela
cd
Derived quantity
SI unit
In base units
Force
newton (N)
kg m s−2
Pressure
pascal (Pa)
N m−2 = kg m−1 s−2
Energy
joule (J)
N m = kg m2 s−2
Power
watt (W)
J s−1
Charge
coulomb (C)
A s
Volume
cubic metre
m3 (1 L = 1 dm3 = 10−3 m3)
Prefix
Symbol
Factor
giga
G
109
mega
M
106
kilo
k
103
centi
c
10−2
milli
m
10−3
micro
µ
10−6
nano
n
10−9
pico
p
10−12
femto
f
10−15
Unit conversion and dimensional analysis
Multiply by conversion factors (fractions equal to 1) and cancel units like algebra. If the units do not cancel to what you want, the setup is wrong.
Example: km h⁻¹ to m s⁻¹
72hkm×1km1000m×3600s1h=20m s−1
Quantity
Useful equivalences
Pressure
1 atm = 101 325 Pa = 1.01325 bar = 760 mm Hg = 760 torr
Volume
1 L = 1 dm3 = 1000 cm3 = 1000 mL
Energy
1 cal = 4.184 J; 1 eV = 1.602×10−19 J; 1 L atm = 101.3 J
Significant figures are the meaningful digits in a measured value: all the certain digits plus the first uncertain one.
All nonzero digits are significant: 285 cm has 3.
Zeros between nonzero digits are significant: 2.005 has 4.
Leading zeros are not significant: 0.0032 has 2.
Zeros at the end of a number are significant only when they are on the right side of the decimal point: 0.200 has 3, but 100 has only 1 (write 1.00×102 to show 3).
Exact numbers (counted objects, defined ratios like 1 m = 100 cm) have infinite significant figures.
In scientific notation N×10n, every digit of N is significant: 4.01×102 has 3.
Calculations
Addition / subtraction
Answer keeps the fewest decimal places
12.11 + 18.0 + 1.012 = 31.122 → 31.1
Multiplication / division
Answer keeps the fewest significant figures
2.5 × 1.25 = 3.125 → 3.1
Rounding off (NCERT rule)
If the digit to be removed is more than 5, increase the preceding digit by one; if less than 5, leave it. If it is exactly 5, leave the preceding digit unchanged when it is even and increase it by one when it is odd: 6.35 → 6.4, but 6.25 → 6.2.
Accuracy, precision and error
Precision is how close repeated measurements are to each other. Accuracy is how close a measurement is to the true value. Results can be precise without being accurate (a miscalibrated balance gives consistent but wrong readings).
Beyond NCERT: systematic errors (faulty calibration, wrong method) shift all readings the same way and hurt accuracy. Random errors scatter readings and hurt precision; averaging many readings reduces them.
Formula bank
Kelvin ↔ Celsius
T(K)=t(∘C)+273.15
Fahrenheit ↔ Celsius
∘F=59(∘C)+32
Density
d=Vm
Percentage error (beyond NCERT)
%error=xt∣xm−xt∣×100
Pressure units
1atm=101325Pa=760mm Hg
Volume units
1L=1dm3=10−3m3
Energy units
1eV=1.602×10−19J,1cal=4.184J
L atm to joule
1L atm=101.3J
Gas constant
R=8.314J K−1mol−1=0.0821L atm K−1mol−1
Tricks & mnemonics
Prefix ladder
“King Henry Died By Drinking Chocolate Milk”: kilo, hecto, deca, base, deci, centi, milli. Moving one step down the ladder (to a smaller unit) multiplies the numerical value by 10, so 1 km = 10 hm = 1000 m.
Atlantic Pacific rule for significant figures
If a decimal point is Present, start counting from the Pacific (left) side at the first nonzero digit. If it is Absent, start from the Atlantic (right) side at the first nonzero digit. Count everything after that.
Add → decimals, multiply → digits
Addition/subtraction: match the fewest decimal places. Multiplication/division: match the fewest significant figures.
Even stays, odd goes up
When the dropped digit is exactly 5: even neighbour stays (6.25 → 6.2), odd neighbour rounds up (6.35 → 6.4).
The −40 coincidence
−40 °C = −40 °F. Use it to check any conversion between Celsius and Fahrenheit.
Units cancel like fractions
Write every number with its unit and cancel. If you end up with L2 or s−2 where you expected J, the setup, not the arithmetic, is wrong.
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
The SI system has seven base units: metre, kilogram, second, ampere, kelvin, mole and candela.Class 11 · Unit 1
When the digit being dropped is exactly 5, an even preceding digit stays as it is and an odd one goes up by one.Class 11 · Unit 1
A final zero counts as significant only if it lies to the right of the decimal point, so 0.200 g has three significant figures while 100 has just one.Class 11 · Unit 1
Precision describes how closely repeated measurements of one quantity agree with each other; accuracy describes how close a result is to the true value.Class 11 · Unit 1
Negative temperatures exist on the Celsius scale, but the Kelvin scale has no negative values.Class 11 · Unit 1
Solved problems
Example 1
NEETFoundation
How many significant figures are present in 0.00500?
A1
B2
C3
D5
Example 2
NEETJEE MainFoundation
Evaluate 5.0063.24×0.08666 to the correct number of significant figures.
A0.05608
B0.0561
C0.056
D0.06
Example 3
NEETFoundation
Add 12.11, 18.0 and 1.012 and report the answer correctly.
Example 4
JEE MainExam level
Express R=0.0821 L atm mol−1 K−1 in J mol−1 K−1.
Example 5
NEETFoundation
Normal body temperature is 98.6 °F. Express it in °C and in K.
Practice
Q1
Single correct
NEETFoundation
Important
The number of significant figures in 6.0012 is:
Q2
Single correct
NEETFoundation
Important
Using the NCERT rounding rule, 6.25 rounded to two significant figures is:
Q3
One or more correct
JEE MainFoundation
Important
Which of the following are derived SI units?
Q4
Single correct
NEETFoundation
Important
Three readings of a 5.00 g standard are 4.81 g, 4.80 g and 4.82 g. The measurements are:
Q5
Single correct
NEETJEE MainExam level
Important
The value of (12.47−12.42)×3.141, reported to the correct number of significant figures, is:
Q6
Single correct
NEETFoundation
The SI unit of amount of substance is the:
Q7
Numerical
NEETJEE MainFoundation
How many significant figures are there in 2.0050×103?
Q8
Single correct
NEETFoundation
1 nm equals:
Q9
Numerical
NEETFoundation
What is −40 °C on the Fahrenheit scale (in °F)?
Q10
Single correct
NEETFoundation
The product 2.5×1.25 reported with correct significant figures is:
Q11
Numerical
JEE MainFoundation
Convert 1 atm to kPa (give the value to three decimal places).
Q12
Numerical
NEETFoundation
A temperature of 300 K corresponds to how many °C? (Use 273.15.)
Q13
Single correct
NEETFoundation
Which of the following is a homogeneous mixture?
Q14
Matrix match
JEE AdvancedFoundation
Match the prefix with its factor. Column I: (P) micro (Q) nano (R) pico (S) mega Column II: (1) 10−12 (2) 106 (3) 10−6 (4) 10−9
Q15
Numerical
NEETFoundation
A metal block of mass 54.0 g displaces 20.0 mL of water. What is its density in g cm−3?
Q16
Single correct
NEETExam level
Using the NCERT rounding rule, the product 1.5×4.3 reported to the correct number of significant figures is:
Q17
Numerical
NEETJEE MainExam level
The density of a gas is 1.25 g L−1. What is its density in kg m−3?
Q18
Numerical
JEE MainExam level
Express R=8.314 J K−1 mol−1 in bar cm3 K−1 mol−1 (two decimal places).
Q19
Numerical
JEE MainJEE AdvancedAdvanced
On a new linear temperature scale (°X), water freezes at −10 °X and boils at 140 °X at 1 atm. At what Celsius temperature do the °X and °C scales show the same number?
Q20
Numerical
NEETJEE MainExam level
The H–H bond dissociation enthalpy is 435.8 kJ mol−1 (NCERT value). What is the energy needed to break one H–H bond, in eV (two decimal places)? (NA=6.022×1023 mol−1, 1 eV = 1.602×10−19 J)
Q21
One or more correct
JEE MainJEE AdvancedAdvanced
Which pairs of quantities have the same SI units?
Q22
Numerical
JEE MainJEE AdvancedAdvanced
The rate constant of a second order reaction is 2.0×10−3 L mol−1 s−1. Express it in cm3 molecule−1 s−1, giving the number that multiplies 10−24 (two decimal places). (NA=6.022×1023 mol−1)
Q23
Single correct
NEETJEE MainAdvanced
A container with a liquid weighs 25.12 g; the empty container weighs 12.1 g. The liquid occupies 5.0 mL. Its density, reported to the correct number of significant figures, is:
Q24
Matrix match
NEETJEE MainExam level
Match each quantity with its SI unit written in base units. Column I: (P) pressure (Q) power (R) Planck’s constant (S) gas constant R Column II: (1) kg m2 s−1 (2) kg m2 s−2 K−1 mol−1 (3) kg m−1 s−2 (4) kg m2 s−3
Q25
Single correct
JEE MainJEE AdvancedAdvanced
In the van der Waals equation (P+V2an2)(V−nb)=nRT, the SI unit of a expressed in base units is:
Q26
One or more correct
NEETExam level
A mass is recorded as 0.0005010 kg. Which statements are correct?
Q27
Numerical
NEETJEE MainExam level
Standard atmospheric pressure supports a 760 mm column of mercury (density 13.6 g cm−3). What height of water (density 1.00 g cm−3), in metres to one decimal place, would it support?
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics