General Chemistry

Mole Concept & Stoichiometry

Count atoms by weighing them: the mole links mass, number of particles and gas volume, and every stoichiometry, concentration and yield calculation runs through it

NEET style

Direct conversions between moles, mass and particles, empirical formula and concentration terms, usually in one or two quick formula based questions

JEE style

Multiconcept stoichiometry with limiting reagents in mixtures, oleum, concentration interconversion and yield, often hidden inside physical chemistry numericals

The mole and Avogadro’s number

Atoms are far too small to count one by one, so chemists count them in packs. In NCERT’s definition, one mole of anything contains the same number of entities (atoms, molecules, ions or electrons) as the number of atoms in exactly 12 g (0.012 kg) of carbon-12. One 12^{12}C atom has a mass of 1.992648×10−231.992648\times10^{-23} g, so this number is NA=12/(1.992648×10−23)=6.0221367×1023N_A = 12/(1.992648\times10^{-23}) = 6.0221367\times10^{23}, used as 6.022×10236.022\times10^{23} mol−1^{-1} (the Avogadro constant). Beyond NCERT: since the 2019 SI revision the mole is defined by fixing NAN_A at exactly 6.02214076×10236.02214076\times10^{23} mol−1^{-1}; the two values agree to better than one part in a billion, so every calculation comes out the same.

The mass of one mole of a substance in grams is its molar mass MM (g mol−1^{-1}). It has the same numerical value as the atomic or molecular mass in u. For example, M(HX2O)=2(1.008)+16.00=18.02M(\ce{H2O}) = 2(1.008) + 16.00 = 18.02 g mol−1^{-1}.

The mole map
n=mM=NNA=VgasVmn = \frac{m}{M} = \frac{N}{N_A} = \frac{V_{\text{gas}}}{V_m}

Vm=22.4V_m = 22.4 L mol−1^{-1} at 273 K and 1 atm; Vm=22.7V_m = 22.7 L mol−1^{-1} at 273.15 K and 1 bar (IUPAC STP, used by NCERT); read the question to see which one it uses

QuantityHow to get molesExample
Mass mmn=m/Mn = m/M9.09.0 g water → 0.500.50 mol
Particles NNn=N/NAn = N/N_A3.011×10233.011\times10^{23} atoms → 0.500.50 mol
Gas volumen=V/Vmn = V/V_m11.211.2 L at 273 K, 1 atm → 0.500.50 mol
Solutionn=M×V(L)n = M \times V(\text{L})0.50.5 L of 11 M → 0.500.50 mol

Atomic, molecular and formula mass

One atomic mass unit is exactly one twelfth of the mass of one 12C^{12}\text{C} atom: 1 u=1.66056×10−241\,\text{u} = 1.66056\times10^{-24} g (NCERT value). The older symbol amu has been replaced by u, the unified mass. Because NAN_A atoms of 12^{12}C weigh exactly 12 g, 1 u=1/NA1\,\text{u} = 1/N_A g.

Most elements are mixtures of isotopes, so the atomic mass in the periodic table is a weighted average:

Average atomic mass
Aˉ=∑(isotopic mass×abundance)∑abundance\bar{A} = \frac{\sum (\text{isotopic mass} \times \text{abundance})}{\sum \text{abundance}}

Chlorine is 75.77% 35^{35}Cl (34.9689 u) and 24.23% 37^{37}Cl (36.9659 u), the data of NCERT Exercise 1.9, so Aˉ=0.7577(34.9689)+0.2423(36.9659)=35.45\bar{A} = 0.7577(34.9689) + 0.2423(36.9659) = 35.45 u, usually rounded to 35.5.

Molecular mass is the sum of atomic masses in a molecule. Ionic solids such as NaCl do not exist as discrete molecules, so we use formula mass for their formula unit.

Percentage composition and formulas

Mass percent of an element
% element=(atoms in formula)×(atomic mass)molar mass×100\%\,\text{element} = \frac{(\text{atoms in formula})\times(\text{atomic mass})}{\text{molar mass}}\times 100

The empirical formula gives the simplest whole number ratio of atoms; the molecular formula gives the actual number. They are related by molecular formula=(empirical formula)n\text{molecular formula} = (\text{empirical formula})_n, where n=molar massempirical formula massn = \dfrac{\text{molar mass}}{\text{empirical formula mass}}.

  1. 1
    Assume 100 g of compound, so percentages become grams.
  2. 2
    Divide each mass by its atomic mass to get moles.
  3. 3
    Divide every mole value by the smallest one.
  4. 4
    If any ratio is close to x.5x.5, x.33x.33 or x.25x.25, multiply all ratios by 2, 3 or 4 to make whole numbers.
  5. 5
    Use the molar mass (if given) to find nn and the molecular formula.

Stoichiometry, limiting reagent and yield

A balanced equation is a recipe in moles. In NX2+3 HX2→2 NHX3\ce{N2 + 3H2 -> 2NH3}, 1 mol of NX2\ce{N2} reacts with 3 mol of HX2\ce{H2} to give 2 mol of NHX3\ce{NH3}.

When reactants are not in the exact ratio, the one that runs out first is the limiting reagent: it decides how much product forms. The other is in excess.

Finding the limiting reagent
limiting reagent=min⁡(niνi)\text{limiting reagent} = \min\left(\frac{n_i}{\nu_i}\right)

Divide the moles of each reactant by its coefficient νi\nu_i in the balanced equation; the smallest quotient identifies the limiting reagent

Percentage yield
% yield=actual yieldtheoretical yield×100\%\,\text{yield} = \frac{\text{actual yield}}{\text{theoretical yield}}\times 100

Laws of chemical combination

  • Conservation of mass (Lavoisier): matter is neither created nor destroyed in a chemical reaction.
  • Definite proportions (Proust): a compound always contains the same elements in the same fixed ratio by mass.
  • Multiple proportions (Dalton): when two elements form more than one compound, the masses of one that combine with a fixed mass of the other are in a simple whole number ratio (for example CO\ce{CO} and COX2\ce{CO2}: 12 : 16 and 12 : 32 → 1 : 2).
  • Gaseous volumes (Gay Lussac): gases react in simple whole number volume ratios at the same temperature and pressure.
  • Avogadro’s law: equal volumes of all gases at the same TT and PP contain equal numbers of molecules.

Concentration terms

NCERT Unit 1 defines mass per cent, mole fraction, molarity and molality; normality is used in JEE titration problems
TermDefinitionUnitDepends on T?
Molarity MMmol solute per litre of solutionmol L−1^{-1}Yes (volume changes)
Molality mmmol solute per kg of solventmol kg−1^{-1}No
Mole fraction xxnA/(nA+nB+… )n_A/(n_A+n_B+\dots)noneNo
Normality NN (beyond NCERT)gram equivalents per litreeq L−1^{-1}Yes
Mass percentmass solute / mass solution × 100%No
ppmmass solute / mass solution × 106^6ppmNo
Molarity ↔ molality
m=1000 M1000 d−M MBm = \frac{1000\,M}{1000\,d - M\,M_B}

dd = density of solution in g mL−1^{-1}, MBM_B = molar mass of solute

Normality (beyond NCERT)
N=M×n-factorN = M \times n\text{-factor}
Dilution and mixing
M1V1=M2V2Mmix=M1V1+M2V2V1+V2M_1V_1 = M_2V_2 \qquad M_{\text{mix}} = \frac{M_1V_1 + M_2V_2}{V_1+V_2}

Formula bank

Moles from mass

n=mMn = \frac{m}{M}

Moles from particles

n=NNA,  NA=6.022×1023 mol−1n = \frac{N}{N_A},\; N_A = 6.022\times10^{23}\,\text{mol}^{-1}

Moles of gas

n=V22.4 L  (273 K, 1 atm)n = \frac{V}{22.4\,\text{L}} \;(273\,\text{K},\,1\,\text{atm})

Mass of one atom

matom=MNAm_{\text{atom}} = \frac{M}{N_A}

Average atomic mass

Aˉ=∑xiAi\bar{A} = \sum x_i A_i

Empirical → molecular

n=molar massempirical formula massn = \frac{\text{molar mass}}{\text{empirical formula mass}}

Percentage yield

% yield=actualtheoretical×100\%\,\text{yield} = \frac{\text{actual}}{\text{theoretical}}\times100

Molarity

M=nBVsoln(L)=wB×1000MB×V(mL)M = \frac{n_B}{V_{\text{soln}}(\text{L})} = \frac{w_B\times1000}{M_B\times V(\text{mL})}

Molality

m=nBwA(kg)=wB×1000MB×wA(g)m = \frac{n_B}{w_A(\text{kg})} = \frac{w_B\times1000}{M_B\times w_A(\text{g})}

Mole fraction

xB=nBnA+nB,xA+xB=1x_B = \frac{n_B}{n_A+n_B},\quad x_A + x_B = 1

Molarity → molality

m=1000M1000d−MMBm = \frac{1000M}{1000d - MM_B}

Mass % → molality

m=1000 wMB(100−w)m = \frac{1000\,w}{M_B(100-w)}

Dilution

M1V1=M2V2M_1V_1 = M_2V_2

Normality (beyond NCERT)

N=M×n-factorN = M\times n\text{-factor}

Free SO₃ in oleum (beyond NCERT)

% SOX3free=(L−100)×8018\%\,\ce{SO3}_{\text{free}} = \frac{(L-100)\times 80}{18}

LL = labelled percentage of oleum, for example 109%

Tricks & mnemonics

The mole map

Draw mass, particles, gas volume and solution volume around a central “moles” box. Every conversion is one hop into moles and one hop out.

Limiting reagent in 5 seconds

Divide moles of each reactant by its coefficient. Smallest number wins (it is limiting). No need to calculate product from both.

Empirical formula chant

“Percent to mass, mass to mole, divide by small, multiply till whole.”

Millimoles save time

M×V(mL)M\times V(\text{mL}) = millimoles. In titrations, equate milliequivalents: N1V1=N2V2N_1V_1 = N_2V_2.

Oleum label shortcut

For oleum labelled (100+x)%(100 + x)\%, the xx g of water combines with 8018x\tfrac{80}{18}x g of free SOX3\ce{SO3}. So free SOX3=4.44 x %\ce{SO3} = 4.44\,x\,\%. For 109%: 40%40\%.

Mass of one atom

Mass of one atom (g) == atomic mass ×1.66×10−24\times 1.66\times10^{-24}. For carbon-12: 1.99×10−231.99\times10^{-23} g.

NCERT high yield lines

Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.

  • A mole of any substance holds the same number of entities as the number of atoms in exactly 12 g of carbon-12; that number, 6.022×10236.022\times10^{23}, is called the Avogadro constant NAN_A.Class 11 · Unit 1
  • Molality does not change with temperature, whereas molarity does, because the volume of a solution changes with temperature.Class 11 · Unit 1
  • The reactant that is completely consumed in a reaction is the limiting reagent; it limits the amount of product formed.Class 11 · Unit 1
  • Law of multiple proportions: hydrogen and oxygen form water and hydrogen peroxide, in which the masses of oxygen combining with 2 g of hydrogen are in the ratio 16 : 32, i.e. 1 : 2.Class 11 · Unit 1
  • Gay Lussac’s law: 2 volumes of hydrogen combine with 1 volume of oxygen to give 2 volumes of water vapour at the same temperature and pressure.Class 11 · Unit 1

Solved problems

Example 1
NEETFoundation
How many atoms are present in 4.4 g of COX2\ce{CO2}? (NA=6.022×1023N_A = 6.022\times10^{23})
  1. A6.022×10226.022\times10^{22}
  2. B1.807×10231.807\times10^{23}
  3. C6.022×10236.022\times10^{23}
  4. D1.204×10231.204\times10^{23}
Example 2
NEETJEE MainExam level
A compound contains 40.0% C, 6.67% H and 53.33% O by mass. Its molar mass is 180 g mol−1^{-1}. Find its molecular formula.
Example 3
JEE MainExam level
10 g of HX2\ce{H2} is mixed with 64 g of OX2\ce{O2} and ignited. What mass of water forms, and which reactant is left over (and how much)?
Example 4
JEE MainExam level
The density of a 2.5 M aqueous NaOH solution is 1.2 g mL−1^{-1}. Calculate its molality.
Example 5
JEE MainJEE AdvancedAdvanced
1.00 g of a mixture of NaX2COX3\ce{Na2CO3} and NaHCOX3\ce{NaHCO3} loses 0.124 g on strong heating. Find the percentage of NaHCOX3\ce{NaHCO3} in the mixture.
Example 6
JEE AdvancedAdvanced
What is the percentage of free SOX3\ce{SO3} in an oleum sample labelled “109%”?

Practice

Q1
Numerical
NEETJEE MainFoundation
Important
What volume (in mL) of 0.1 M HX2SOX4\ce{H2SO4} is needed to exactly neutralise 50 mL of 0.2 M NaOH?
Q2
One or more correct
JEE MainJEE AdvancedFoundation
Important
Which of the following concentration terms are independent of temperature?
Q3
Numerical
JEE MainExam level
Important
Calculate the molality (mol kg−1^{-1}) of a 20% (w/w) aqueous NaOH solution. Round to two decimal places.
Q4
Single correct
NEETJEE MainExam level
Important
A hydrocarbon contains 85.7% carbon by mass and has a vapour density of 28. Its molecular formula is:
Q5
One or more correct
NEETJEE MainAdvanced
Important
2.7 g of aluminium is heated with 7.1 g of chlorine: 2 Al+3 ClX2→2 AlClX3\ce{2Al + 3Cl2 -> 2AlCl3}. Which statements are correct? (Al = 27, Cl = 35.5)
Q6
Single correct
NEETFoundation
The mass of one atom of carbon-12 is:
Q7
Single correct
NEETFoundation
Which of the following contains the largest number of molecules?
Q8
Single correct
NEETFoundation
4 g of NaOH is dissolved in water to make 250 mL of solution. Its molarity is:
Q9
Numerical
NEETJEE MainFoundation
How many moles of oxygen atoms are present in 0.5 mol of CaX3(POX4)X2\ce{Ca3(PO4)2}?
Q10
Single correct
NEETFoundation
A compound contains 50% sulfur and 50% oxygen by mass. Its empirical formula is:
Q11
Numerical
NEETFoundation
20 mL of 0.5 M HCl is diluted with water to 100 mL. What is the molarity of the diluted solution?
Q12
Single correct
NEETJEE MainFoundation
5.6 L of a gas at 273 K and 1 atm weighs 11 g. The gas could be:
Q13
Matrix match
JEE AdvancedFoundation
Match Column I with Column II.
Column I: (P) Molarity (Q) Molality (R) Mole fraction (S) ppm
Column II: (1) dimensionless (2) mol kg−1^{-1} (3) mol L−1^{-1} (4) parts per 10610^6 by mass
Q14
Numerical
JEE MainJEE AdvancedExam level
An oleum sample is labelled 104.5%. What is the percentage of free SOX3\ce{SO3} in it?
Q15
Single correct
NEETFoundation
28 g of NX2\ce{N2} reacts with excess HX2\ce{H2} and gives 17 g of NHX3\ce{NH3}. The percentage yield is:
Q16
Numerical
NEETJEE MainExam level
The mole fraction of glucose in an aqueous solution is 0.10. What is the molality of the solution (mol kg−1^{-1}, two decimal places)?
Q17
Numerical
NEETJEE MainExam level
200 mL of 0.50 M NaCl is mixed with 300 mL of 0.20 M CaClX2\ce{CaCl2}. What is the molarity of chloride ions in the mixture (two decimal places)?
Q18
Numerical
NEETExam level
What volume of air (in L, containing 20% oxygen by volume) is needed for the complete combustion of 5.0 L of methane, both measured at the same temperature and pressure?
Q19
Numerical
JEE MainJEE AdvancedAdvanced
10 mL of a mixture of methane and ethane needs exactly 27.5 mL of oxygen for complete combustion, all volumes at the same temperature and pressure. What volume of COX2\ce{CO2} (in mL) is formed?
Q20
Numerical
JEE MainJEE AdvancedAdvanced
Phosphoric acid is made in two steps: PX4+5 OX2→PX4OX10\ce{P4 + 5O2 -> P4O10}, then PX4OX10+6 HX2O→4 HX3POX4\ce{P4O10 + 6H2O -> 4H3PO4}. Each step has an 80% yield. What mass of HX3POX4\ce{H3PO4} (in g, one decimal place) is obtained from 62.0 g of PX4\ce{P4}? (P = 31, HX3POX4\ce{H3PO4} = 98 g mol−1^{-1})
Q21
Numerical
JEE MainJEE AdvancedAdvanced
A 2.00 M aqueous solution of urea (M=60M = 60 g mol−1^{-1}) has a density of 1.12 g mL−1^{-1}. What is the mole fraction of urea in it (four decimal places)?
Q22
Numerical
NEETJEE MainExam level
Boron has two isotopes, 10^{10}B (isotopic mass 10.01 u) and 11^{11}B (11.01 u). Its average atomic mass is 10.81 u. What is the percentage abundance of 10^{10}B?
Q23
Numerical
NEETJEE MainJEE AdvancedAdvanced
1.80 g of an organic compound containing only C, H and O burns completely to give 2.64 g of COX2\ce{CO2} and 1.08 g of HX2O\ce{H2O}. Its molar mass is 90 g mol−1^{-1}. How many oxygen atoms does one molecule contain?
Q24
Numerical
JEE MainJEE AdvancedAdvanced
1.84 g of a mixture of CaCOX3\ce{CaCO3} and MgCOX3\ce{MgCO3} is heated strongly until the mass is constant; 0.96 g of residue remains. What is the percentage by mass of CaCOX3\ce{CaCO3} in the mixture (one decimal place)? (Ca = 40, Mg = 24)
Q25
Matrix match
NEETJEE MainExam level
Match each solution with its concentration.
Column I: (P) 0.10 mol glucose in 500 g water (Q) 9.8 g HX2SOX4\ce{H2SO4} in 500 mL of solution (R) 6.0 g urea in 18 g water, mole fraction of urea (S) 1.0 mg of solute in 1.0 kg of solution
Column II: (1) 0.091 (2) 0.20 mol kg−1^{-1} (3) 1.0 ppm (4) 0.20 mol L−1^{-1}
Q26
Single correct
NEETExam level
The number of electrons in 1.6 g of methane is (NA=6.022×1023N_A = 6.022\times10^{23} mol−1^{-1}):

Ready for the real thing?

Take a timed, NTA style test on this chapter with instant analytics