Procedures · 02

Redox titration with KMnO₄

Determine the strength of KMnO₄ (or of a reducing agent) in acidic solution.

You will need

  • 50 mL burette (amber or clean clear glass)
  • 10 mL pipette with filler
  • Conical flasks, measuring cylinder
  • Bunsen burner, tripod, gauze and thermometer (for oxalic acid)

Safety

  • KMnO₄ is an oxidiser and stains skin brown
  • Hot flasks: handle with tongs or a cloth
  • Dilute H₂SO₄ is corrosive, so wear goggles

Procedure

0 of 6 done

Calculation

2 MnOX4X−+5 CX2OX4X2−+16 HX+→2 MnX2++10 COX2+8 HX2O\ce{2MnO4- + 5C2O4^2- + 16H+ -> 2Mn^2+ + 10CO2 + 8H2O}, so 5 nMnOX4X−=2 noxalate5\,n_{\ce{MnO4-}} = 2\,n_{\text{oxalate}}.

MKMnOX4=25⋅MoxVoxVKMnOX4M_{\ce{KMnO4}} = \frac{2}{5}\cdot\frac{M_{\text{ox}}V_{\text{ox}}}{V_{\ce{KMnO4}}}

With Mohr’s salt, MnOX4X−+5 FeX2++8 HX+→MnX2++5 FeX3++4 HX2O\ce{MnO4- + 5Fe^2+ + 8H+ -> Mn^2+ + 5Fe^3+ + 4H2O}, so MKMnOX4=15⋅MFeX2+VFeX2+VKMnOX4M_{\ce{KMnO4}} = \frac{1}{5}\cdot\frac{M_{\ce{Fe^2+}}V_{\ce{Fe^2+}}}{V_{\ce{KMnO4}}}.

Common mistakes

  • Using HCl instead of H₂SO₄: KMnO₄ oxidises Cl⁻ to Cl₂, using up extra titrant
  • Using HNO₃: it is itself an oxidising agent
  • Too little acid: a brown precipitate of MnO₂ forms instead of colourless Mn²⁺
  • Letting the oxalic acid cool below about 60 °C, so the end point is slow and overshoots

Volumetric analysis chapter