Exception Tracker
147 exceptions examiners love, each with the reason. Turn on self test to hide the reasons until you have recalled them.
147 of 147 exceptions
Periodic Classification & Periodic Trends
Open chapter ›: Be > B and Mg > Al.
s electrons penetrate more than p electrons, so the first p electron is easier to remove.
: N > O and P > S.
Half filled p³ stability; pairing repulsion in p⁴.
Atomic radius of Ga (135 pm) is smaller than Al (143 pm).
Ten poorly shielding 3d electrons increase for Ga.
Zr and Hf have almost identical atomic radii (160 and 159 pm).
Lanthanoid contraction cancels the expected increase.
Cl has the most negative electron gain enthalpy, not F.
Interelectronic repulsion in the small 2p shell of F.
O has a less negative electron gain enthalpy than S.
Small size of O; repulsion in the compact 2p shell.
Noble gases, Be, Mg and N have positive or near zero electron gain enthalpies.
Stable closed or half filled configurations.
Noble gases appear larger than the halogens before them.
Their radii are van der Waals radii, while others are covalent radii.
of Pb (715 kJ/mol) is higher than that of Sn (708 kJ/mol).
Poor shielding by 4f and 5d electrons (lanthanoid contraction).
of Ga (579 kJ/mol) is slightly higher than that of Al (577 kJ/mol), not lower.
Extra nuclear charge is poorly shielded by 3d electrons.
of O (3388 kJ/mol) is higher than that of F (3374 kJ/mol).
has the half filled set, while is .
Hydrogen & the s-Block Elements
Open chapter ›Li is the strongest reducing agent in water even though it has the highest ionisation enthalpy in group 1.
Very high hydration enthalpy of Li⁺.
Li is the only alkali metal that forms a nitride directly ().
Small Li⁺ gives a high lattice energy with N³⁻; diagonal similarity with Mg.
decomposes on heating; other alkali metal carbonates do not.
Small Li⁺ polarises the carbonate ion.
gives on heating, while gives and .
Li⁺ stabilises the small oxide ion.
has the lowest ionic mobility in water despite being the smallest ion.
It is the most heavily hydrated.
BeO and are amphoteric; the other group 2 oxides are basic.
High charge density of Be²⁺ (similar to Al³⁺).
is a polymeric chain in the solid state.
Electron deficient Be completes its octet through Cl bridges.
Be and Mg give no flame colour.
Their electrons are too tightly held to be excited by the flame.
Solubility of group 2 sulfates decreases down the group, while that of hydroxides increases.
Hydration enthalpy dominates for sulfates; lattice enthalpy for hydroxides.
K, Rb and Cs form superoxides; Na forms a peroxide; Li forms a normal oxide.
Lattice stabilisation of large anions by large cations.
Group 13: The Boron Family
Open chapter ›Atomic radius of Ga (135 pm) is less than that of Al (143 pm).
Poor shielding by the ten 3d electrons.
First IE order is B > Tl > Ga > Al > In, so Tl is higher than Al and In.
Poor shielding by 4f and 5d electrons raises for Tl.
Lewis acidity: .
Back bonding between filled p orbitals of the halogen and the empty 2p orbital of B is strongest from F.
is more stable than .
Inert pair effect.
is thallium(I) triiodide, , not thallium(III) iodide.
Tl³⁺ would oxidise I⁻; E°(Tl³⁺/Tl⁺) = +1.25 V vs E°(I₃⁻/I⁻) = +0.54 V.
Boric acid is a Lewis acid, not a proton donor.
Electron deficient B accepts OH⁻.
Gallium melts at 303 K but boils at 2676 K.
Unusual structure of Ga₂ units in the solid; strong metallic bonding in the liquid.
Al is rendered passive by concentrated .
A protective Al₂O₃ film forms.
Electronegativity increases from Al (1.5) to Tl (1.8).
Poor shielding by d and f electrons keeps the heavier atoms smaller than expected.
is monomeric while dimerises.
Small B is partly satisfied by back bonding and cannot hold four large Cl atoms; Al can.
does not exist, although (cryolite) does.
Boron has no d orbitals, so its covalency stops at 4.
Group 14: The Carbon Family
Open chapter ›Lead shows practically no catenation, while carbon shows the most.
E–E bond enthalpy falls sharply down the group.
and do not exist (or are very unstable).
Pb(IV) oxidises I⁻ and Br⁻; inert pair effect.
is not hydrolysed, but hydrolyses readily.
Si can accept the water lone pair into vacant 3d orbitals; C cannot.
is a gas while is a high melting solid.
C forms double bonds by sideways p orbital overlap (discrete molecules); Si forms a network of single bonds.
exists but does not.
Six large Cl atoms cannot fit around Si, and the lone pairs of Cl interact only weakly with Si⁴⁺.
Diamond does not conduct electricity but is one of the best conductors of heat.
No free electrons, but the rigid lattice transmits vibrations very efficiently.
Graphite, not diamond, is the thermodynamically stable form ( of diamond = +1.9 kJ mol).
Diamond persists only because conversion is extremely slow.
Sn(IV) is more stable than Sn(II), but Pb(II) is more stable than Pb(IV).
Inert pair effect is stronger for Pb.
First IE of Pb (715) is higher than that of Sn (708 kJ mol).
Poor shielding by 4f and 5d electrons.
CO is a neutral oxide, unlike the acidic .
It does not react with water, acids or bases to form salts.
GeO is acidic, while SnO and PbO are amphoteric.
Metallic character of the element rises down the group.
White tin crumbles to grey tin below 286 K (tin pest).
Grey α-tin is the stable allotrope at low temperature.
Group 15: The Nitrogen Family
Open chapter ›does not exist although does.
N has no d orbitals; maximum covalency 4.
Nitrogen is a diatomic gas; phosphorus is a solid.
Only N forms strong multiple bonds by sideways p orbital overlap.
The N–N single bond is weaker than the P–P single bond.
Lone pair repulsion across the short N–N bond.
boils higher than and , yet lower than and .
Hydrogen bonding vs increasing van der Waals forces.
Bond angle drops sharply from 107.8° () to 93.6° ().
Larger P uses almost pure p orbitals for bonding (Drago’s rule).
is dibasic and is monobasic, though each has three H atoms.
P–H hydrogens are not ionisable.
Bi(V) is a strong oxidising agent ().
Inert pair effect makes Bi(III) more stable.
Solid is ionic, .
Ion pair packs more efficiently in the crystal.
is a much weaker base than .
P’s lone pair is in a diffuse orbital with high s character.
Nitrogen has a near zero (slightly positive) electron gain enthalpy.
Extra stability of the half filled 2p³ configuration and small size.
Group 16: The Oxygen Family
Open chapter ›Oxygen is a diatomic gas, while sulfur is an solid.
O forms strong double bonds by sideways p orbital overlap; S prefers rings of single bonds.
Water is a liquid with a far higher boiling point than , and .
Extensive hydrogen bonding.
O has a less negative electron gain enthalpy than S.
Repulsion in the compact 2p shell.
Oxygen shows positive oxidation states only in fluorides ( +2, +1).
Only F is more electronegative.
exists and is very inert; and do not exist.
No d orbitals for O; steric crowding for six Cl.
Bond angle in (104.5°) is much larger than in (92°).
Drago’s rule: heavier atoms use nearly pure p orbitals.
Acid strength: , opposite to electronegativity.
Bond enthalpy decreases down the group.
is absorbed in sulfuric acid, not in water.
Direct absorption forms a dense mist of acid droplets.
Formation of ozone from oxygen is endothermic.
O₃ is less stable than O₂.
Sulfur vapour at high temperature is paramagnetic.
It contains S₂ molecules, which, like O₂, have two unpaired electrons.
Group 17: The Halogens
Open chapter ›F–F bond enthalpy (158.8) is lower than Cl–Cl (242.6) and Br–Br (192.8 kJ mol).
Lone pair repulsion between small F atoms.
Chlorine, not fluorine, has the most negative electron gain enthalpy.
Compact 2p shell of F repels the incoming electron.
F₂ is the strongest oxidant despite its smaller electron gain enthalpy.
Low bond enthalpy and very high hydration enthalpy of F⁻.
Fluorine shows only the −1 oxidation state.
Most electronegative element; no d orbitals.
HF is a weak acid, while HCl, HBr and HI are strong.
Very strong H–F bond and hydrogen bonding.
HF has the highest boiling point of the hydrogen halides.
Hydrogen bonded chains.
AgF is soluble in water; AgCl, AgBr and AgI are insoluble.
High hydration enthalpy of the small F⁻ ion.
is insoluble, while is very soluble.
Very high lattice enthalpy of CaF₂.
Fluorine forms only one oxoacid (HOF).
High electronegativity and small size.
HOCl is the strongest oxidant but the weakest acid among chlorine oxoacids.
Least stabilised conjugate base; unstable +1 chlorine.
Interhalogens are more reactive than the parent halogens (except F₂).
X–X′ bonds are weaker than X–X bonds.
Group 18: The Noble Gases
Open chapter ›Helium is in group 18 though its configuration is , not .
Completely filled valence shell and inertness.
Helium does not solidify at normal pressure.
Extremely weak interatomic forces and large zero point energy.
Xenon forms stable compounds, while He, Ne and Ar form none under ordinary conditions.
Lower ionisation enthalpy and larger, more polarisable atom.
Hydrolysis of is not a redox reaction, though that of and is.
Xe remains +6 in XeO₃.
is square planar despite having six electron pairs.
Two lone pairs occupy opposite (trans) octahedral positions.
Argon, not helium, is the most abundant noble gas in air.
Ar comes from decay of ⁴⁰K in rocks; light He escapes the atmosphere.
The first IE of Xe (1170) is almost equal to that of the molecule (1175 kJ mol).
Basis of Bartlett’s synthesis.
Noble gases have positive electron gain enthalpies.
An added electron must enter a new, higher shell.
The d and f Block Elements
Open chapter ›Cr is and Cu is .
Extra exchange stability of half filled and completely filled d subshells.
Zn, Cd and Hg are not regarded as typical transition elements.
They are d¹⁰ in the ground state and in their common ions.
Mercury is a liquid at room temperature; Zn and Cd melt unusually low.
No unpaired d electrons for metallic bonding (plus relativistic effects for Hg).
Mn has an unexpectedly low melting point within the 3d series.
The stable half filled d⁵ set makes its d electrons less available for metallic bonding.
Cu has a positive and does not liberate from dilute acids.
High atomisation plus ionisation enthalpy is not compensated by hydration enthalpy.
disproportionates in water though is stable.
Much larger hydration enthalpy of Cu²⁺.
of Mn, Ni and Zn are more negative than expected.
Stable d⁵ Mn²⁺ and d¹⁰ Zn²⁺; for Ni, the most negative hydration enthalpy of Ni²⁺.
The highest fluoride of Mn is though its highest oxide is .
Oxygen forms multiple bonds to the metal.
and are intensely coloured though the metal is .
Charge transfer from the oxygen ligands to the metal.
is unstable in water but very stable in complexes like .
Strong field ligands give a large CFSE to low spin d⁶.
Zr and Hf have almost identical radii.
Lanthanoid contraction.
, and exist although +3 is the normal lanthanoid state.
They reach f⁰, f⁷ or f¹⁴.
The actinoid contraction is larger from element to element than the lanthanoid contraction.
5f electrons shield even more poorly than 4f.
Coordination Compounds I: Werner, Nomenclature & Isomerism
Open chapter ›Two different compounds (green and violet) share the formula and both give 1 mol AgCl.
They are trans and cis isomers, which is evidence for octahedral geometry.
Ethane-1,2-diamine (en) is bidentate but neutral.
Two N lone pairs; no charge.
gives no test for , while Mohr’s salt does.
Complex ions do not dissociate into simple metal ions.
Tetrahedral complexes do not show geometrical isomerism.
All four positions are adjacent to each other.
trans- is optically inactive while the cis form is active.
The trans form has a mirror plane.
Cisplatin is an anticancer drug but transplatin is inactive.
Only the cis geometry can bind adjacent DNA bases.
Square planar has two geometrical isomers but no optical isomers.
The molecular plane is a mirror plane.
In (brown ring) iron is +1.
NO binds as NO⁺.
Coordination Compounds II: VBT, Crystal Field Theory & Carbonyls
Open chapter ›is high spin and paramagnetic, unlike almost all Co(III) complexes.
F⁻ is a weak field ligand.
Tetrahedral complexes are almost never low spin.
Δt = 4/9 Δo is smaller than the pairing energy.
is tetrahedral and diamagnetic though Ni has 10 valence electrons as .
CO pushes the 4s electrons into 3d (3d¹⁰), leaving sp³ orbitals for bonding.
and () complexes are square planar even with weak field ligands.
Δ is much larger for 4d and 5d metals.
is square planar though is .
Strong Jahn Teller distortion of d⁹.
is diamagnetic, though free has 4 unpaired electrons.
Strong field CN⁻ gives low spin t₂g⁶.
is diamagnetic while is paramagnetic.
CN⁻ is strong field (dsp², square planar); Cl⁻ is weak field (sp³, tetrahedral).
CO is the strongest field ligand although it is a weak σ donor.
It is an excellent π acceptor (back bonding).
Anhydrous is white; is blue.
Without water ligands there is no crystal field splitting, so no d to d absorption.
complexes are colourless.
d¹⁰, so no d to d transitions are possible.
Organometallic Chemistry
Open chapter ›is a stable 17 electron, paramagnetic monomer.
Steric crowding prevents dimerisation; it is easily reduced to the 18 electron [V(CO)₆]⁻.
does not exist as a monomer; it dimerises to .
A Mn–Mn bond brings each Mn to 18 electrons.
Wilkinson’s catalyst and Zeise’s salt are stable with only 16 electrons.
Square planar d⁸ complexes leave the high energy orbital empty.
Ethene binds side on (η²) in Zeise’s salt.
Bonding uses the C=C π electrons, with back donation into π*.
Ferrocene undergoes Friedel Crafts acylation like an aromatic compound.
The Cp rings are 6π aromatic systems.
Sodium ethoxide is not an organometallic compound although it contains a metal and carbon.
There is no direct bond between the metal and carbon.
Vitamin B₁₂ coenzymes are naturally occurring organometallic compounds.
Methylcobalamin and adenosylcobalamin have a Co–C bond.
Bioinorganic Chemistry
Open chapter ›Haemocyanin carries oxygen with copper, not iron, and turns blue when oxygenated.
Two Cu⁺ ions bind O₂ as peroxide, becoming Cu²⁺.
The central metal of chlorophyll is magnesium, not iron.
Mg²⁺ suits the light harvesting chlorin ring.
Vitamin B₁₂ coenzymes contain a direct Co–C bond.
They are natural organometallic compounds.
Haemoglobin binds O₂ cooperatively (sigmoidal curve); myoglobin does not.
Communication between four subunits.
Nitrogenase always produces H₂ along with NH₃.
Obligatory reduction of protons in the mechanism.
Iron(III) haemoglobin (methaemoglobin) cannot transport oxygen.
O₂ binds only Fe(II) haem.
Fluoride protects teeth at about 1 ppm but damages them above about 2 ppm.
Fluorapatite formation versus fluorosis.
Cd²⁺ is toxic although it is in the same group as essential Zn²⁺.
It displaces Zn from enzymes and binds thiol groups strongly.
Metallurgy: Isolation of Metals
Open chapter ›Iron pyrites () is not used as an ore of iron.
NCERT: the abundant oxide ores are preferred because they do not produce polluting gases such as the SO₂ released from pyrites.
The line has a negative slope in the Ellingham diagram.
Gas moles increase, so ΔS is positive.
Below about 983 K CO is a better reductant than C; above it carbon is better.
Crossing point of the CO→CO₂ and C→CO lines.
Aluminium is not extracted by carbon reduction.
Al₂O₃ is extremely stable and carbon would form Al₄C₃ at the required temperature.
Copper needs no separate reducing agent in the converter.
Self reduction: Cu₂S reduces Cu₂O.
Silver and gold are extracted by first oxidising them (with /CN⁻) and then reducing with Zn.
Hydrometallurgy: soluble cyano complexes form only after oxidation.
In zone refining the impurities travel with the molten zone.
They are more soluble in the melt than in the solid.
The graphite anodes are consumed in the Hall Héroult cell.
Oxide ions discharge as O₂, which burns the carbon to CO and CO₂.
Qualitative Salt Analysis
Open chapter ›appears in both group I and group II.
PbCl₂ is partly soluble, so the remainder precipitates as PbS.
NH₄Cl must be added before NH₄OH in group III.
The common ion effect keeps [OH⁻] low, so Mn and Mg hydroxides stay in solution (Zn²⁺ stays as an ammine complex).
is oxidised to before group III.
Fe(OH)₂ is too soluble to precipitate completely.
Only chloride gives the chromyl chloride test; bromide and iodide do not, and covalent does not respond.
CrO₂Br₂ and CrO₂I₂ are not formed; HgCl₂ does not release Cl⁻ readily.
is tested on the original salt, not during group analysis.
Group reagents themselves contain NH₄⁺.
AgCl dissolves in but AgI does not.
AgI has a far smaller Ksp than the stability of [Ag(NH₃)₂]⁺ can overcome.
dissolves in hot water and reappears as golden spangles on cooling.
Its solubility rises sharply with temperature.
is in group VI, not group V.
NH₄Cl keeps [CO₃²⁻] too low for MgCO₃ to precipitate.
ZnS is white while most other sulfides in groups II and IV are black.
Zn²⁺ (d¹⁰) has no low energy charge transfer absorption in the visible region.
CdS (group II) is yellow, unlike the black CuS and PbS in the same group.
Its band gap absorbs only blue light.