Coordination Compounds II: VBT, Crystal Field Theory & Carbonyls
Bonding in complexes through valence bond theory with inner and outer orbital complexes, crystal field splitting in octahedral, tetrahedral and square planar fields, the spectrochemical series, high and low spin complexes, CFSE, colour, Jahn Teller distortion and synergic bonding in metal carbonyls
NEET · HighJEE Main · HighJEE Advanced · High
NEET style
Direct NCERT questions on hybridisation and magnetic behaviour of standard complexes, the spectrochemical series, Δt = 4/9 Δo, colour and synergic bonding
JEE style
CFSE calculations, spin state from Δo versus P, magnetic moments of complexes, Jahn Teller distortion and C–O stretching frequency comparisons
Valence bond theory
The metal uses hybrid orbitals to accept ligand lone pairs. Strong field ligands (CN⁻, CO, NH₃ with M³⁺) can force pairing of (n−1)d electrons, freeing inner d orbitals: inner orbital (d2sp3) complexes. Weak field ligands leave the d electrons unpaired, so outer d orbitals are used: outer orbital (sp3d2) complexes.
Complex
Metal ion
Hybridisation
Geometry
Unpaired e⁻
[Co(NHX3)X6]X3+
CoX3+, d6
d2sp3 (inner)
Octahedral
0 (diamagnetic)
[CoFX6]X3−
CoX3+, d6
sp3d2 (outer)
Octahedral
4
[Fe(CN)X6]X4−
FeX2+, d6
d2sp3
Octahedral
0
[Fe(CN)X6]X3−
FeX3+, d5
d2sp3
Octahedral
1
[FeFX6]X3−
FeX3+, d5
sp3d2
Octahedral
5
[Cr(NHX3)X6]X3+
CrX3+, d3
d2sp3
Octahedral
3
[Ni(CN)X4]X2−
NiX2+, d8
dsp2
Square planar
0
[NiClX4]X2−
NiX2+, d8
sp3
Tetrahedral
2
[Ni(CO)X4]
Ni(0), 3d84s2→3d10
sp3
Tetrahedral
0
Crystal field theory: octahedral complexes
Ligands are treated as point charges. In an octahedral field, the eg set (dx2−y2, dz2), pointing at the ligands, is raised by +0.6Δo; the t2g set (dxy, dyz, dxz), pointing between them, is lowered by −0.4Δo. The gap is the crystal field splitting Δo.
For d4 to d7 there is a choice. If Δo<P (pairing energy), electrons enter eg singly, giving high spin (weak field). If Δo>P, they pair in t2g, giving low spin (strong field).
Low spin CFSE values exclude the extra pairing energy, which must be added for a full energy comparison
Configuration
High spin
CFSE
Unpaired
Low spin
CFSE
Unpaired
d4
t2g3eg1
−0.6Δo
4
t2g4
−1.6Δo
2
d5
t2g3eg2
0
5
t2g5
−2.0Δo
1
d6
t2g4eg2
−0.4Δo
4
t2g6
−2.4Δo
0
d7
t2g5eg2
−0.8Δo
3
t2g6eg1
−1.8Δo
1
Spectrochemical series, tetrahedral and square planar fields
Δ also increases with the metal’s oxidation state (MX3+>MX2+) and down a group (3d < 4d < 5d), so 4d/5d complexes are almost always low spin.
Tetrahedral field: the order is reversed, with e (dx2−y2, dz2) lower and t2 higher (NCERT’s figure labels these sets eg and t2g), and Δt=94Δo. Since Δt is small, tetrahedral complexes are practically always high spin.
Square planar: d8 ions with strong field ligands ([Ni(CN)X4]X2−) and virtually all d8 4d/5d ions (PdX2+, PtX2+, AuX3+) are square planar and diamagnetic.
Colour and Jahn Teller distortion
A complex absorbs light of energy Δ to promote an electron (t2g→eg); we see the complementary colour. [Ti(HX2O)X6]X3+ (d1) absorbs around 498 nm (blue green) and looks violet, giving Δo=hcNA/λ≈240 kJ mol−1.
Without ligands there is no splitting and no colour: anhydrous CuSOX4 is white, CuSOX4⋅5HX2O is blue; heating [Ti(HX2O)X6]ClX3 removes the water ligands and it becomes colourless.
Changing ligands changes the colour: [Ni(HX2O)X6]X2+ is green; with en ([Ni(en)X3]X2+) the stronger field shifts absorption to shorter λ and the complex turns violet.
Jahn Teller distortion (beyond NCERT): an unevenly filled degenerate eg set distorts the octahedron (usually two long axial bonds). It is strong for d9 (CuX2+), high spin d4 (CrX2+, MnX3+) and low spin d7.
Metal carbonyls and synergic bonding
1
σ donation: the lone pair on carbon of CO enters a vacant metal orbital, forming an M←C σ bond.
2
π back donation: filled metal d orbitals donate electron density into the empty π* orbitals of CO.
3
The two effects reinforce each other (synergic bonding): the M–C bond gains double bond character, and the C–O bond is weakened, so ν(C–O) falls below 2143 cm−1 (free CO).
Beyond NCERT: the more electron rich the metal, the stronger the back donation and the lower ν(CO): [V(CO)X6]X−<[Cr(CO)X6]<[Mn(CO)X6]X+. Structures: Ni(CO)X4 tetrahedral, Fe(CO)X5 trigonal bipyramidal, Cr(CO)X6 octahedral, MnX2(CO)X10 with a Mn–Mn bond, CoX2(CO)X8 with a Co–Co bond and two bridging CO groups.
Formula bank
Tetrahedral splitting
Δt=94Δo
Octahedral CFSE
CFSE=(−0.4nt2g+0.6neg)Δo+mP
Tetrahedral CFSE
CFSE=(−0.6ne+0.4nt2)Δt
Spin state
Δo>P⇒low spin;Δo<P⇒high spin
Splitting from absorption
Δ=λhcNA
Spin only moment
μ=n(n+2)BM
Tricks & mnemonics
Spectrochemical series
“I Bought Some Chocolates So Friends Of Ours Would Not Ever Need Extra Cake Crumbs”: I⁻ < Br⁻ < SCN⁻ < Cl⁻ < S²⁻ < F⁻ < OH⁻ < ox < H₂O < NCS⁻ < edta < NH₃ < en < CN⁻ < CO.
Inner vs outer
Strong field → pairs → d2sp3 (inner). Weak field → no pairing → sp3d2 (outer).
4/9 of Δo → tetrahedral complexes are practically always high spin.
Back bonding versus ν(CO)
More negative charge on the metal → more back bonding → weaker C≡O → lower stretching frequency.
Jahn Teller list
d⁹, high spin d⁴ and low spin d⁷: each has an odd number of electrons in eg.
NCERT high yield lines
Original NCERT aligned summaries of the lines examiners love. Tap “Quiz me” to test yourself instantly.
In an octahedral field the d orbitals split into a lower t2g set and a higher eg set; for tetrahedral complexes Δt = (4/9)Δo, so the splitting is not enough to force pairing and low spin tetrahedral complexes are rarely observed.Class 12 · Unit 5
[Co(NH₃)₆]³⁺ is an inner orbital (d²sp³), diamagnetic complex, while [CoF₆]³⁻ is an outer orbital (sp³d²), paramagnetic complex with four unpaired electrons.Class 12 · Unit 5
The M–C bond in metal carbonyls has both σ and π character; the π bond forms by donation of electrons from filled metal d orbitals into the vacant antibonding π* orbital of CO, and this synergic effect strengthens the bond between metal and CO.Class 12 · Unit 5
The colour of [Ti(H₂O)₆]³⁺ is due to a d to d transition of its single electron from t2g to eg; in the absence of ligands crystal field splitting does not occur and the substance is colourless.Class 12 · Unit 5
The spectrochemical series is an experimentally determined order of ligands based on the absorption of light by their complexes.Class 12 · Unit 5
Exceptions to remember
[CoFX6]X3− is high spin and paramagnetic, unlike almost all Co(III) complexes.
F⁻ is a weak field ligand.
Tetrahedral complexes are almost never low spin.
Δt = 4/9 Δo is smaller than the pairing energy.
[Ni(CO)X4] is tetrahedral and diamagnetic though Ni has 10 valence electrons as 3d84s2.
CO pushes the 4s electrons into 3d (3d¹⁰), leaving sp³ orbitals for bonding.
PdX2+ and PtX2+ (d8) complexes are square planar even with weak field ligands.
Δ is much larger for 4d and 5d metals.
[Cu(NHX3)X4]X2+ is square planar though CuX2+ is d9.
Strong Jahn Teller distortion of d⁹.
[Fe(CN)X6]X4− is diamagnetic, though free FeX2+ has 4 unpaired electrons.
Strong field CN⁻ gives low spin t₂g⁶.
[Ni(CN)X4]X2− is diamagnetic while [NiClX4]X2− is paramagnetic.
CN⁻ is strong field (dsp², square planar); Cl⁻ is weak field (sp³, tetrahedral).
CO is the strongest field ligand although it is a weak σ donor.
It is an excellent π acceptor (back bonding).
Anhydrous CuSOX4 is white; CuSOX4⋅5HX2O is blue.
Without water ligands there is no crystal field splitting, so no d to d absorption.
ZnX2+ complexes are colourless.
d¹⁰, so no d to d transitions are possible.
Solved problems
Example 1
NEETJEE MainExam level
Explain, using VBT, why [Co(NHX3)X6]X3+ is diamagnetic but [CoFX6]X3− is paramagnetic.
Example 2
JEE MainJEE AdvancedExam level
Calculate the CFSE (in units of Δo, ignoring pairing energy) for a low spin d6 octahedral complex such as [Co(NHX3)X6]X3+.
Example 3
JEE MainExam level
[Ti(HX2O)X6]X3+ absorbs light at 498 nm. Calculate Δo in kJ mol−1.
Example 4
NEETJEE MainFoundation
Find the spin only magnetic moment of [Fe(CN)X6]X3−.
Example 5
JEE AdvancedExam level
Arrange [V(CO)X6]X−, [Cr(CO)X6] and [Mn(CO)X6]X+ in increasing order of C–O stretching frequency.
Practice
Q1
Matrix match
NEETJEE MainFoundation
Important
Match the complex with the metal’s hybridisation. Column I: (P) [Co(NHX3)X6]X3+ (Q) [CoFX6]X3− (R) [NiClX4]X2− (S) [Ni(CN)X4]X2− Column II: (1) sp3 (2) dsp2 (3) d2sp3 (4) sp3d2
Q2
One or more correct
NEETJEE MainExam level
Important
Which are diamagnetic?
Q3
Numerical
JEE MainExam level
Important
Magnitude of the CFSE (in units of Δo, ignoring pairing energy) of a low spin d6 octahedral complex:
Q4
Matrix match
JEE MainJEE AdvancedAdvanced
Important
Match the complex with its spin only magnetic moment. Column I: (P) [Fe(CN)X6]X3− (Q) [CoFX6]X3− (R) [Mn(CN)X6]X3− (S) [Cr(NHX3)X6]X3+ Column II: (1) 2.84 BM (2) 4.90 BM (3) 1.73 BM (4) 3.87 BM
Q5
One or more correct
JEE MainJEE AdvancedAdvanced
Important
Which of the following statements are correct?
Q6
Single correct
NEETFoundation
The hybridisation of Ni in [Ni(CN)X4]X2− is:
Q7
Numerical
NEETJEE MainFoundation
Number of unpaired electrons in [CoFX6]X3−:
Q8
Single correct
NEETFoundation
The relation between tetrahedral and octahedral splitting is:
Q9
Single correct
NEETFoundation
The strongest field ligand is:
Q10
Numerical
JEE MainExam level
A d1 complex absorbs at 498 nm. Calculate Δo in kJ mol−1 (nearest integer).
Q11
Single correct
JEE AdvancedExam level
A strong Jahn Teller distortion is expected for:
Q12
Single correct
NEETFoundation
In metal carbonyls, the M–C π bond forms by:
Q13
Numerical
NEETJEE MainFoundation
Spin only magnetic moment (BM) of [Fe(CN)X6]X3−:
Q14
Single correct
NEETFoundation
[Ti(HX2O)X6]X3+ appears:
Q15
Single correct
NEETJEE MainExam level
Which of the following is an outer orbital complex?
Q16
Single correct
NEETJEE MainExam level
[MnBrX4]X2− has a spin only magnetic moment of 5.9 BM. Its geometry and the hybridisation of Mn are:
Q17
Numerical
JEE MainExam level
What is the magnitude of the CFSE of a tetrahedral d7 complex, in units of Δt?
Q18
One or more correct
NEETJEE MainExam level
Which of the following complexes are paramagnetic?
Q19
Single correct
JEE MainJEE AdvancedExam level
Which species has the lowest C–O stretching frequency?
Q20
Single correct
NEETJEE MainExam level
Adding excess ethane-1,2-diamine to green aqueous [Ni(HX2O)X6]X2+ gives violet [Ni(en)X3]X2+. Compared with water, en:
Q21
Numerical
JEE MainExam level
Δo for [Cr(NHX3)X6]X3+ is 260 kJ mol−1. At what wavelength (in nm) does the complex absorb most strongly? (h=6.626×10−34 J s, c=2.998×108 m s−1, NA=6.022×1023 mol−1)
Q22
Numerical
JEE AdvancedAdvanced
For [Co(NHX3)X6]X3+ take Δo = 23000 cm−1 and pairing energy P = 19000 cm−1. By how many cm−1 is the low spin arrangement more stable than the high spin arrangement?
Q23
Numerical
JEE AdvancedAdvanced
Taking Δt=94Δo, by how much (in units of Δo) does the magnitude of the CFSE of an octahedral NiX2+ complex exceed that of a tetrahedral NiX2+ complex with the same ligands? (Give the answer to two decimal places.)
Q24
Numerical
JEE MainJEE AdvancedAdvanced
How many of the following are square planar? [Ni(CN)X4]X2−, [NiClX4]X2−, [PtClX4]X2−, [Cu(NHX3)X4]X2+, [Zn(NHX3)X4]X2+, [Pd(NHX3)X4]X2+, [Ni(CO)X4], [AuClX4]X−
Q25
Single correct
JEE MainJEE AdvancedAdvanced
CoX3+ oxidises water (E∘(CoX3+/CoX2+)=+1.97 V), yet [Co(NHX3)X6]X3+ is stable in water. The best explanation is:
Ready for the real thing?
Take a timed, NTA style test on this chapter with instant analytics